10.3Gbps SFP+ CWDM Transceiver, Single Mode, 10km Reach

Product Features
● Supports up to 10.7Gbps bit rates
● Hot-pluggable SFP+ footprint
● CWDM DFB laser and PIN photodiode, Up to 10km for SMF transmission
● Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle
● Compatible with RoHS
● Single +3.3V power supply
● Real Time Digital Diagnostic Monitoring
● Operating case temperature:Standard: 0 to +70°C

Applications
● 10Gbps CWDM Optical systems
● 10GBASE-LR at 10.3125Gbps
● 10GBASE-LW at 9.953Gbps
● LTE systems
● Other Optical links

Description
The SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and 10km transmission distance with SMF.
The transceiver consists of three sections: a uncooled DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions.

Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Supply Voltage	Vcc	-0.5	4.5	V
Storage Temperature	Ts	-40	+85	°C
Operating Humidity	–	5	85	%

Recommended Operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Operating Case Temperature	Tc	0		+70	°C
Power Supply Voltage	Vcc	3.135	3.30	3.465	V
Power Supply Current	Icc			320	mA
Data Rate		1.0	10.3	10.7	Gbps

Optical and Electrical Characteristics

Parameter		Symbol		Min	Typical	Max	Unit	Notes
Transmitter
Centre Wavelength			λc	λc-6.5	λc	λc+6.5	nm
Spectral Width（-20dB）			Δλ			1	nm
Side-Mode Suppression Ratio			SMSR	30	–		dB
Average Output Power			Pout	-3		+2	dBm	1
Extinction Ratio			ER	3.5			dB
Data Input Swing Differential			VIN	180		850	mV	2
Input Differential Impedance			ZIN	90	100	110	Ω
TX Disable	Disable			2.0		Vcc	V
	Enable			0		0.8	V
TX Fault	Fault			2.0		Vcc	V
	Normal			0		0.8	V
Receiver
Centre Wavelength			λc	1260		1620	nm
Receiver Sensitivity						-14	dBm	3
Receiver Overload				0.5			dBm	3
LOS De-Assert			LOSD			-15	dBm
LOS Assert			LOSA	-28			dBm
LOS Hysteresis				0.5			dB
Data Output Swing Differential			Vout	300		900	mV	4
LOS			High	2.0		Vcc	V
			Low			0.8	V

Mechanical Dimensions

Ordering information

Part Number	Product Description
FTCS-Cxx1X-10D	1270~1570nm CWDM,  10Gbps,  LC,  10km,  0°C~+70°C,  with DDM
FTCS-Cxx1X-05D	1590~1610nm CWDM,  10Gbps,  LC,  5km,  0°C~+70°C,  with DDM

北亿纤通 | F-tone Networks

企业邮箱： sales@f-tone.com
企业手机：19081343401
企业电话：028-85255257
企业传真：028-85977702

注：本产品有全国产化型号可选
本产品仅展示部分参数（WN），如有需要，请您联系我们。

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.ve rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative. available from any F-tone Networks sales representative.