SFP28 Transceiver,25G,LR,1310nm

Description
The F-tone Networks FTCS-1325G-10D is a single-Channel, Pluggable, Fiber-Optic SFP28 for 25 Gigabit Ethernet Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 25.78125 Gbps up to 10km. This module is designed to operate over single mode fiber systems using a nominal wavelength of 1310nm. The electrical interface uses a 20 contact edge type connector. The optical interface uses duplex LC receptacle. This module incorporates F-tone Networks proven circuit and technology to provide reliable long life, high performance, and consistent service.

Features
● Hot-pluggable SFP28 form factor
● Supports 25Gbps data rate
● Maximum link length of 10km
● 1310nm DFB laser and PIN photo-detector
● Internal CDR on both Transmitter and Receiver channel
● Duplex LC receptacle
● Single 3.3V power supply
● Power dissipation < 1.0W
● RoHS 2.0 compliant (2011/65/EU, lead free)
● Commercial case temperature range: 0°C to 70°C

Applications
● 25GBASE-LR Ethernet

Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Supply VoltageVcc03.6V
Storage TemperatureTs-40+85°C
Operating Humidity585%

Recommended Operating Conditions

ParameterSymbolMinTypicalMaxUnit
Operating Case TemperatureCommercialTc0+70°C
Power Supply VoltageVcc3.133.33.47V
Power Supply CurrentIcc303mA

Electrical Specifications

ParameterSymbolMinTypicalMaxUnit
Differential Input ImpedanceZin90100110ohm
Differential Output ImpedanceZout90100110ohm
Differential Input Voltage Amplitude1ΔVin3001100mVp-p
Differential Output Voltage Amplitude2ΔVout500800mVp-p
Input Logic Level HighVIH2.0VccV
Input Logic Level LowVIL00.8V
Output Logic Level HighVOHVcc-0.5VccV
Output Logic Level LowVOL00.4V

Note:
1、Differential input voltage amplitude is measured between TxnP and TxnN.
2、Differential output voltage amplitude is measured between RxnP and RxnN.

Optical Characteristics

ParameterSymbolMinTypicalMaxUnitNotes
Transmitter
Data rateBR25.78Gbps
Centre Wavelengthλc129513101325nm
Spectral Width (-20dB)σ1nm
Side Mode Suppression RatioSMSR30dB
Average Output PowerPavg-72dBm
Optical Modulation AmptitudeOMA-42.2dBm
Extinction RatioER3dB
Eye Mask Coordinates{0.31, 0.4, 0.45, 0.34, 0.38, 0.4}
Receiver
Data rateBR25.78Gbps
Centre Wavelengthλc129513101325nm
Average Power at Receiver-13.32dBm
Receive reflerence(max)-26dB
Receiver Sensitivity (OMA)Psens-12.0dBm1
Stessed receiver sensitivity(OMA)-9.5dBm2
LOS De-AssertLOSD-12dBm
LOS AssertLOSA-30dBm
LOS Hysteresis0.5dB

Notes1: 
1、For 25G-LR with FEC, receiver sensitivity is defined at 5E-5 BER level, not 10-12 BER level.
2、Measured with conformance test signal at TP3 for BER=5E-5.

Mechanical Dimensions
3.3 2

Ordering information

Part NumberProduct Description
FTCS-1325G-10D25Gbps, 1310nm; SFP28, 10km, 0ºC ~ +70ºC

北亿纤通 | F-tone Networks

企业邮箱: sales@f-tone.com
企业手机:19081343401
企业电话:028-85255257
企业传真:028-85977702

注:本产品有全国产化型号可选
本产品为SFP28系列光模块,仅展示部分参数,如有需要,请联系我们。

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.ply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.dom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.ailable from any F-tone Networks sales representative.y F-tone Networks sales representative.

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

Traffic Testing

测试误码率和丢包率,使其符合相应标准,确保收发器的性能。

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

端面测试

检查光纤收发模块的端面并保持清洁,以实现更稳定的数据传输、更好的性能和耐用性。

兼容品牌:

华为 | 华三 | 中兴 | 锐捷 | Cisco | Juniper | Arista | Brocade |HPE ProCurve | HPE Aruba | HPE BladeSystem | HPE H3C | H3C | Dell | Extreme | HW | Generic | F-tone | Intel | Netgear | IBM | NVIDIA/Mellanox (Ethernet) | Ciena | Fortinet | Avago | Avaya | Alcatel-Lucent | D-Link | F5 | Ubiquiti | Mikrotik |Broadcom…..

滚动至顶部