QSFP28 Transceiver,100G,DWDM,PAM4

Product Features

  • Hot pluggable QSFP28 MSA form factor
  • Up to 80km reach for G.652 SMF with transport white box
  • Single +3.3V power supply
  • Temperature Range 0 to 70°C
  • Transmitter: Cooled EML 2*27.5Gbaud/s DWDM TOSA
  • Receiver: 2*27.5Gbaud/s Pin-PD ROSA  
  • 4*25G CAUI4 electrical interface
  • Integrated SFEC with high coding gain
  • PAM4 modulation format on 100GHz ITU DWDM wavelength grid compatible
  • Dual CS adaptor
  • Compatible with RoHS6

Applications

  • 100G Ethernet Metro-Access over DWDM
  • P to P Access Network
ABSOLUTE MAXIMUM RATINGS
Table 2. ABSOLUTE MAXIMUM RATINGS
ParameterSymbolUnitMinMax
Storage Temperature RangeTsoC-40+85
Relative HumidityRH%585
Power Supply VoltageVccV-0.5+3.6
Operating Case Temperature RangeTcoC0+70
Receiver Damage Threshold Per LanePdagdBm+5.2

SPECIFICATION

Recommended Operating Conditions

ParameterUnitsMIN.TYP.MAX.Notes
Recommended Operating Conditions
Operating Case Temperature°C0+70
Power Supply VoltageV3.1353.33.465
Control Input Voltage High                        V2Vcc+0.3               
Control Input Voltage LowV-0.30.8
Rx Diff Data Output LoadΩ100
Power DissipationW5Tc = 70 °C, Vcc = 3.465V, End of Life
Transceiver Electrical Specification (TP1)

Table 3. Transceiver Electrical Specification (TP1)

ParameterCommentMinTypMaxUnit
Signaling Rate, each laneTyp -100 ppm25.7813Typ +100 ppmGb/s
DC Common Mode Output Voltage-3502850mV
Differential Return LossSee template1dB
Common to Differential Mode Conversion Return LossSee template2dB
Differential Termination MismatchAt 1 MHz10%
Receiver Electrical Specification (TP4)

Table 4. Receiver Electrical Specification (TP4)

ParameterCommentMinTypMaxUnit
Signaling Rate, each laneTyp – 100 ppm25.7813Typ + 100 ppmGb/s
Common-Mode AC Output Voltage (RMS)17.5mV
Differential pk-pk output voltage swing900mVpp
Eye WidthEW15 at 10-15 probability; PRBS 29-10.57UI
Eye Height DifferentialEH15 at 10-15 probability; PRBS 29-1228mV
Vertical Eye Closure5.5dB
Differential Output Return LossSee template1dB
Common to Differential Mode Conversion Return LossSee template2dB
Differential Termination Mismatch10%
Transition Time (20% to 80%)12ps
DC Common Mode Voltage3-3502850mV

Notes:
1. Reference IEEE P802.3bm Annex 83E, Figure 83E-7 for template
2. Reference IEEE P802.3bm Annex 83E, Figure 83E-8 for template

Transmitter Optical Specification (TP2)

Table 5. Transmitter Optical Specification (TP2)

ParameterUnitsMIN.TYP.MAX.Notes
Optical output powerdBm-1+4
Transmitter RateGbps55.0431855.04318*2λ
Lane center wavelength spacingGHz100
Center wavelengthnmSee Wavelength Table
Extinction ratiodB6
Side-mode suppression RatiodB30
RIN OMAdB/Hz-132
Optical Return Loss TolerancedB20
Transmitter reflectancedB-12
Dispersion Toleranceps/nm-15050Residual dispersion (RD) after DCM, and at worst ONSR
Receiver Optical Specification(TP3)
Table 6. Receiver Optical Specification(TP3)
ParameterUnitsMIN.TYP.MAX.Notes
Receive RateGbps55.0431855.04318*2λ
Center WavelengthnmSee Wavelength Table
Receiver reflectancedB-26
Receiver Power, each lanedBm-12.56
Required OSNRdB28 Receiving Power@0~-7dBmPre-FEC BER 4E-3
31Receiving Power@-7~-12.5dBm
RSSI AccuracydB-33

MECHANICAL DRAWINGS

Ordering Information
Table 1. Ordering Information
Part NoSpecifications
PackageData rateTxPoutRx Sen.TopOthers
FTQ2-DxxHG-PAM4-80QSFP28103.125GbpsCooled EAM DFB-LD-1 ~ +4 dBm-12.5 dBm @BER 4E-30~70oCDDM

北亿纤通 | F-tone Networks

企业邮箱: sales@f-tone.com
企业手机:19081343401
企业电话:028-85255257
企业传真:028-85977702

注:本产品有全国产化型号可选
本产品为QSFP28系列光模块,仅展示部分参数,如有需要,请联系我们。

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.s not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

Traffic Testing

测试误码率和丢包率,使其符合相应标准,确保收发器的性能。

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

端面测试

检查光纤收发模块的端面并保持清洁,以实现更稳定的数据传输、更好的性能和耐用性。

兼容品牌:

华为 | 华三 | 中兴 | 锐捷 | Cisco | Juniper | Arista | Brocade |HPE ProCurve | HPE Aruba | HPE BladeSystem | HPE H3C | H3C | Dell | Extreme | HW | Generic | F-tone | Intel | Netgear | IBM | NVIDIA/Mellanox (Ethernet) | Ciena | Fortinet | Avago | Avaya | Alcatel-Lucent | D-Link | F5 | Ubiquiti | Mikrotik |Broadcom…..

滚动至顶部