
Description
The FTCQ-4X-LR4Rxx is a 4x10G hot pluggable optical receiver. F-tone Networks technology enables an optical DeMUX with AAWG that delivers a 40Gbps data link in a compact QSFP footprint. The optical connectivity is based on SMF LC connectors. The Rx consists of 4 10Gbps CWDM channels, whose wavelengths are in the 1300nm range. The QSFP-LR Receiver is designed for applications based on the QSFP MSA, IEEE 802.3ba, and 40GBASE-LR4 requirements of up to 10km reach.
Features
● Transmission data rate up to 11.2Gbps per channel
● QSFP+ MSA compliant
● Compliant to IEEE 802.3ba specification for 40GBASE-LR4 links
● High Sensitivity PIN-TIA with AAWG DEMUX.
● Up to 10km reach over standard single mode fiber
● Compliant with QDR/DDR Infiniband data rates
● Hot pluggable electrical interface
● Power consumption<1.5W
● 3.3V power supplyvoltage
● RoHS 6 compliant(lead free)
● Operating case temperature -20°C to +85°C
Commercial: 0 ~ +70℃
Industrial: -40 ~ +85℃
Applications
● 40G Ethernet
● Infiniband QDR and DDR interconnects
● Client-side 40G Telecom connections
Absolute Maximum Ratings
| Parameter | Symbol | Min | Max | Unit | 
| Supply Voltage | Vcc | -0.3 | 3.6 | V | 
| Input Voltage | Vin | -0.3 | Vcc+0.3 | V | 
| Storage Temperature | Ts | -20 | 85 | ºC | 
| Case Operating Temperature | Tc | 0 | 70 | ºC | 
| Humidity (non-condensing) | Rh | 5 | 95 | % | 
Recommended Operating Conditions
| Parameter | Symbol | Min | Typical | Max | Unit | 
| Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | 
| Operating Case Temperature | Tc | -20 | 85 | ºC | |
| Data Rate Per Lane | fd | 10.3125 | Gb/s | ||
| Humidity | Rh | 5 | 85 | % | |
| Power Dissipation | Pm | 1.5 | W | ||
| Fiber Bend Radius | Rb | 3 | cm | 
Electrical Specifications
| Parameter | Symbol | Min | Typical | Max | Unit | 
| Differential Input Impedance | Zin | 90 | 100 | 110 | ohm | 
| Differential Output Impedance | Zout | 90 | 100 | 110 | ohm | 
| Differential Input Voltage Amplitude1 | ΔVin | 120 | 1200 | mVp-p | |
| Differential Output Voltage Amplitude2 | ΔVout | 300 | 850 | mVp-p | |
| Skew | Sw | 300 | ps | ||
| Bit Error Rate | BER | 1×10-12 | |||
| Input Logic Level High | VIH | 2.0 | Vcc | V | |
| Input Logic Level Low | VIL | 0 | 0.8 | V | |
| Output Logic Level High | VOH | Vcc-0.5 | Vcc | V | |
| Output Logic Level Low | VOL | 0 | 0.4 | V | 
Note:
- Differential input voltage amplitude is measured between TxnP and TxnN.
- Differential output voltage amplitude is measured between RxnP and RxnN.
Optical Characteristics
| Parameter | Symbol | Min | Typical | Max | Unit | 
| Receiver | |||||
| Lane Wavelength Range | λc | 1264.51284.51304.51324.5 | 1271129113111331 | 1277.51297.51317.51337.5 | nm | 
| Stressed Receiver Sensitivity in OMA2 | -9.6 | dBm | |||
| Average Power at ReceiverInput (each lane) | -13.7 | 2.3 | dBm | ||
| Receiver Reflectance | RR | -26 | dB | ||
| LOS Assert | LOSA | -30 | dBm | ||
| LOS De-Assert – OMA | LOSD | -14 | dBm | ||
| LOS Hysteresis | LOSH | 0.5 | dB | ||
Note:
- Hit Ratio = 1×10–12
- Measured with conformance test signal at TP3 for BER=10–12
Mechanical Dimensions

Ordering Information
| Part Number | Product Description | 
| FTCQ-4X-LR4R | 40Gb/s QSFP+ LR4,Pull-Tab,10 km on a standard single mode fiber(RX Only),0ºC ~ +70ºC | 
| FTCQ-4X-LR4RI | 40Gb/s QSFP+ LR4,Pull-Tab,10 km on a standard single mode fiber(RX Only),-40ºC ~ +85ºC | 
北亿纤通 | F-tone Networks
企业邮箱: sales@f-tone.com
企业手机:19081343401
企业电话:028-85255257
企业传真:028-85977702
注:本产品有全国产化型号可选
本产品为QSFP+系列光模块,仅展示部分参数,如有需要,请联系我们。
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.sentative.ther details are available from any F-tone Networks sales representative.urther details are available from any F-tone Networks sales representative.e Networks sales representative.tive.s or others. Further details are available from any F-tone Networks sales representative.y F-tone Networks sales representative.

光学性能测试
测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。
Traffic Testing
测试误码率和丢包率,使其符合相应标准,确保收发器的性能。


光学性能测试
测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。
端面测试
检查光纤收发模块的端面并保持清洁,以实现更稳定的数据传输、更好的性能和耐用性。


兼容品牌:
华为 | 华三 | 中兴 | 锐捷 | Cisco | Juniper | Arista | Brocade |HPE ProCurve | HPE Aruba | HPE BladeSystem | HPE H3C | H3C | Dell | Extreme | HW | Generic | F-tone | Intel | Netgear | IBM | NVIDIA/Mellanox (Ethernet) | Ciena | Fortinet | Avago | Avaya | Alcatel-Lucent | D-Link | F5 | Ubiquiti | Mikrotik |Broadcom…..





