10Gb/s 1310nm SFP+ 5km Transceiver, -40°C~+80°C

PRODUCT FEATURES
● Up to 11.1Gbps Data Links
● Up to 5km transmission on SMF
● FP Laser and PIN receiver
● Metal enclosure, for lower EMI
● 2-wire interface with integrated Digital Diagnostic monitoring
● Hot-pluggable SFP+ footprint
● Specifications compliant with SFF 8472
● Compliant with SFP+ MSA with LC connector
● Single 3.3V power supply
● Case operating temperature range:0°C to 70°C/-40°C to 85°C
● Power dissipation < 1.5W

APPLICATIONS
● 10GBASE-LR/LW & 10G Ethernet

STANDARD
● Compliant to 802.3ae 10GBASE-LR/LW
● Compliant to SFF-8431
● RoHS Compliant

Absolute Maximum Ratings   

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Storage Temperature	Ts	-40	–	85	ºC
Relative Humidity	RH	5	–	95	%
Power Supply Voltage	VCC	-0.3	–	4	V
Signal Input Voltage		Vcc-0.3	–	Vcc+0.3	V

Recommended Operating Conditions

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Case Operating Temperature	Tcase	0	–	70	ºC	Without air flow
		-40	–	85	ºC
Power Supply Voltage	VCC	3.14	3.3	3.47	V
Power Supply Current	ICC	–		450	mA
Data Rate	BR		10.3125		Gbps
Transmission Distance	TD		5		km
Coupled fiber	Single mode fiber					9/125um SMF

Optical Characteristics 

Parameter	Symbol	Min	Typ	Max	Unit	NOTE
Transmitter
Output Opt. Power	POUT	-6		-0.5	dBm	1
Optical Wavelength	λ	1260	1310	1355	nm
Spectral Width (RMS)	σ			3	nm
Optical Extinction Ratio	ER	3.5			dB
Output Eye Mask	Compliant with IEEE 802.3ae
Receiver
Rx Sensitivity	PSEN			-14.4	dBm	2
Input Saturation Power (Overload)	Psat	0.5			dBm
Wavelength Range	λC	1270		1610	nm
LOS De -Assert	LOSD			-17	dBm
LOS Assert	LOSA	-30			dBm
LOS Hysteresis		0.5	1.0		dB

Notes:   

1. Class 1 Laser Safety per FDA/CDRH and IEC-825-1 regulations.   
2. Measured with a PRBS 2³¹-1 test pattern, @10.325Gb/s, BER<10^-12 .  

Electrical Characteristics 

Parameter	Symbol	Min	Typ	Max	Unit	NOTE
Supply Voltage	Vcc	3.14	3.3	3.46	V
Supply Current	Icc			450	mA
Transmitter
Input differential impedance	Rin		100		Ω	1
Differential data input swing	Vin,pp	180		1200	mV
Transmit Disable Voltage	VD	Vcc–1.3		Vcc	V
Transmit Enable Voltage	VEN	Vee		Vee+ 0.8	V	2
Transmit Disable Assert Time				10	us
Receiver
Differential data output swing	Vout,pp	300		850	mV	3
Data output rise time	tr	30			ps	4
Data output fall time	tf	30			ps	4
LOS Fault	VLOS fault	Vcc–1.3		VccHOST	V	5
LOS Normal	VLOS norm	Vee		Vee+0.8	V	5
Power Supply Rejection	PSR	100			mVpp	6

Notes:  

1. Connected directly to TX data input pins. AC coupled thereafter.   
2. Or open circuit.   
3. Input 100 ohms differential termination.   
4. These are unfiltered 20-80% values
5. Loss Of Signal is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected.   

Receiver sensitivity is compliant with power supply sinusoidal modulation of 20 Hz to 1.5 MHz up to specified    value applied through the recommended power supply filtering network.

Outline Dimensions

Ordering information

Part Number	Product Description
FTJG-131X-05D	SFP+ Transceiver, 1310nm, 10Gbps, 5km, with DDM, 0°C~+70°C,
FTJG-131X-05DI	SFP+ Transceiver, 1310nm, 10Gbps, 5km, with DDM, -40°C~+80°C,

北亿纤通 | F-tone Networks

企业邮箱： sales@f-tone.com
企业手机：19081343401
企业电话：028-85255257
企业传真：028-85977702

本产品为光模块SFP+系列，仅展示部分参数（V2），如有需要，请联系我们。

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.