10/25Gbps SFP28 Transceiver, Single Mode, 10km Reach

Product Features

  • Supports up to 10/25.78Gbps bit rates
  • Hot-pluggable SFP+ footprint
  • 1310nm DFB laser and PIN photodiode, Up to 10km for SMF transmission
  • Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle
  • Compatible with RoHS
  • Single +3.3V power supply
  • Real Time Digital Diagnostic Monitoring
  • Operating case temperature:
  • Standard:  0 to +70°C
  • Industrial: -40 to +85°C

Applications

  • 25GBASE-LR
  • 10GBASE-LR

Description

The SFP28 transceivers are high performance, cost effective modules supporting data rate of 10/25.78Gbps and 10km transmission distance with SMF.

The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.

The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions. 

Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Supply VoltageVcc-0.54.5V
Storage TemperatureTs-40+85°C
Operating Humidity585%

Recommended Operating Conditions

ParameterSymbolMinTypicalMaxUnit
Operating Case TemperatureTc0 +70°C
-40 +85
Power Supply VoltageVcc3.1353.303.465V
Power Supply CurrentIcc  400mA
Data Rate  10/25.78 Gbps

Optical and Electrical Characteristics

ParameterSymbolMinTypicalMaxUnitNotes
Transmitter
Centre Wavelengthλc127013101350nm 
Spectral Width(-20dB)Δλ  1nm 
Side-Mode Suppression RatioSMSR30 dB 
Average Output PowerPout-7 2dBm1
Extinction RatioER3.5  dB 
Data Input Swing DifferentialVIN180 850mV2
Input Differential ImpedanceZIN90100110Ω 
TX DisableDisable 2.0 VccV 
Enable 0 0.8V 
TX FaultFault 2.0 VccV 
Normal 0 0.8V 
Receiver
Centre Wavelengthλc1260 1600nm 
Receiver Sensitivity   -13.3dBm3
Receiver Sensitivity   -15 4
Receiver Overload   2dBm3
LOS De-AssertLOSD  -15dBm 
LOS AssertLOSA-30  dBm 
LOS Hysteresis 0.5  dB 
Data Output Swing DifferentialVout300 900mV5
LOSHigh2.0 VccV 
Low  0.8V

Mechanical Dimensions

Ordering information

Part NumberProduct Description
FTCS-131X-10D1310nm, 10Gbps, LC, 10km,with DDM, 0°C~+70°C
FTCS-131X-10DI1310nm, 10Gbps, LC, 10km, with DDM, -40°C~+85°C
FTCS-1325G-10D1310nm, 25.78Gbps, LC, 10km ,with DDM, 0°C~+70°C
FTCS-1325G-10DI1310nm, 25.78Gbps, LC, 10km, with DDM , -40°C~+85°C

北亿纤通 | F-tone Networks

企业邮箱: sales@f-tone.com
企业手机:19081343401
企业电话:028-85255257
企业传真:028-85977702

注:本产品有全国产化型号可选
本产品为SFP28光模块,仅展示部分参数(wn),如有需要,请联系我们。

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative. patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.dom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.ailable from any F-tone Networks sales representative.y F-tone Networks sales representative.

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

Traffic Testing

测试误码率和丢包率,使其符合相应标准,确保收发器的性能。

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

端面测试

检查光纤收发模块的端面并保持清洁,以实现更稳定的数据传输、更好的性能和耐用性。

兼容品牌:

华为 | 华三 | 中兴 | 锐捷 | Cisco | Juniper | Arista | Brocade |HPE ProCurve | HPE Aruba | HPE BladeSystem | HPE H3C | H3C | Dell | Extreme | HW | Generic | F-tone | Intel | Netgear | IBM | NVIDIA/Mellanox (Ethernet) | Ciena | Fortinet | Avago | Avaya | Alcatel-Lucent | D-Link | F5 | Ubiquiti | Mikrotik |Broadcom…..

滚动至顶部