50G 80/96-CH Flat Top Athermal AWG

产品描述/Description
F-tone Networks’s Athermal AWG series products take silica-on-silicon planar technology and it is built with high performance and reliability, which can be used in general DWDM systems. Based on the athermal design and packing, it is totally passive product which does not require any electrical power or temperature control. For 50G AAWG Mux/Demux, it supports up to 96-CH based on a single chipset. Customized wavelengths, package and fiber options are also available.

特点/Features
● 低损耗/Low Insertion Loss
● 宽工作带宽/Wide pass band
● 高通道隔离度/High Channel Isolation
● 高稳定性和可靠性/High Stability and reliability

应用/Applications
● 波分复用网络/WDM Network
● 电信通信/Telecommunication
● 接入网/Access Network

极限条件/Absolute Maximum Ratings

参数/Parameters	条件/Conditions	规格/Specifications		单位/Unit
		Min.	Max.
工作温度/Operating Temperature	Device Not Powered on Heater Element	-5	65	oC
工作湿度/Operating Humidity	无冷凝环境/Non-Condensing Environment	5	85	%RH
存储温度/Storage Temperature	Device Not Powered on Heater Element	-40	85	oC
存储湿度/Storage Humidity	无冷凝环境/Non-Condensing Environment	0	95	%RH

光学性能/Optical Specifications(平顶无热AWG/ Flat Top Athermal AWG)

参数/Parameters	条件/Conditions	规格/Specifications			单位/Unit
		Min.	Typ.	Max.
通道数/Number of Channels		80/96			CH
通道间隔/Number Channel Spacing		50			GHz
中心波长/Center Wavelength	ITU frequency, measured in vacuum.	C-band			nm
通道带宽/Clear Channel Passband	Centered at each ITU channel frequency	± 6.25			GHz
波长精度/Wavelength Stability	Maximum range of the wavelength error  of all channels and temperatures in average polarization.	±0.05			nm
-1dB带宽/-1dB Channel Bandwidth	Clear channel bandwidth defined by passband shape. For each Channel.	0.20			nm
-3dB带宽/-3dB Channel Bandwidth	Clear channel bandwidth defined by passband shape. For each channel.	0.28			nm
ITU波长通道插损/ Optical Insertion Loss at ITU grid	Defined as the minimum transmission at ITU wavelength for all channels. For each channel, at all temperatures and polarizations with connectors.			7.5	dB
相邻通道隔离度 Adjacent Channel Isolation	Ratio of peak transmission to the maximum transmission over both adjacent ITU wavelengths	25			dB
非相邻通道隔离度 Non-Adjacent, Channel Isolation	Ratio of peak transmission in channelpassband to the maximum transmission over all non-adjacent ITU wavelength	30			dB
总串扰/ Total Crosstalk	Ratio of power in channel to power in all other ITU wavelength	20			dB
插损一致性/Insertion Loss Uniformity	The difference between the maximum and minimum of passband across all channels		0.8	1.3	dB
方向性/Directivity(Mux Only)	Ratio of reflected power out of any channel(other than channel n)to power in from the input channel n	45			dB
回损/Optical Return loss	Input & output ports	40			dB
偏振相关损耗/ Polarization Dependent Loss in Clear Channel Band	Worst-case value measured in ± 20GHz around ITU wavelength for each port.		0.3	0.5	dB
偏振模式色散 Polarization Mode Dispersion	Maximum differential group delay within reference ITU wavelength			1.0	ps
色度色散/Chromatic Dispersion	Maximum change rate of group delay versus wavelength within reference ITU wavelength	-20		+20	ps/nm
最大输入光功率 Maximum Input Optical Power	Maximum continuous optical power			500	mW

机械尺寸, 光纤输出和连接头配置/Mechanical Dimensions, Fiber Coding and Connector Specifications

尺寸/Dimensions

120 x 70 x 10

mm

光纤类型/Fiber Type

公共端/Common SMF-28e fiber with 900um loose tube/ SMF-28e 加900um松套管 通道端/Channels: SMF-28e Ribbons

光纤长度/Fiber Length

输入端/Common

1000mm ± 50mm with 900um loose tube/输入纤长1000mm ± 50mm 900um套管

输出端/Channels

Ribbon 500mm± 20 mm and Fan out 500mm± 30mm with 900um loose tube /输出带纤500mm± 20 mm，加分支器纤长500mm± 30mm

公共端/Common

颜色/Color

白/white

带纤标识/Ribbon Identification

带纤末端贴数码贴标识 /Label with ribbon number will be placed close to end-points

连接器类型/Connector Options

输入端/Common

LC/UPC

输出端/Channels

LC/UPC

带纤光纤标识/Fiber Identification in Ribbon

1

蓝/Blue

2

橙/Orange

3

绿/Green

4

褐/Brown

5

灰/Grey

6

白/White

7

红/Red

8

黑/Black

9

黄/Yellow

10

紫/Purple

11

粉/Pink

12

水/Aqua

*可按客户要求定制/Customized design available

订购信息/Ordering Information

FT-13-XAWG	X	XX	X	XXX	X	X	X	XX
Type	Band	Number of Channels	Spacing	1st Channel	Chip Type	Package	Fiber Length(Total Length)	In/Out Connector
FT-13-AAWG= FT-13系列 Athermal AWG	C=C-Band L=L-Band D=C+L-Band X=Customize	16=16-CH 32=32-CH 40=40-CH 48=48-CH 96=96-CH XX=Special	1=100G 2=200G 5=50G X=Special	C62=C62 H61=H61 C60=C60 H59=H59 XXX=special	G=Gaussian F=Flat Top	M=Module R=Rack X=Special	1=0.5m 2=1m 3=1.5m 4=2m X=Specify	0=None 1=FC/APC 2=FC/PC 3=SC/APC 4=SC/PC 5=LC/APC 6=LC/PC 7=ST/UPC X=Specify

Note: Typical channel plan: ITU wavelengths 50G H13(1566.72nm)-C61(1528.77nm).

北亿纤通 | F-tone Networks
企业邮箱：sales@f-tone.com
企业手机：19081343401
企业电话：028-85255257
企业传真：028-85977702

注：本产品有全国产化型号可选
本产品为FT-13系列，仅展示部分参数，如有需要，请您联系我们。
Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.