100GHz,200GHz密集型波分复用器DWDM LGX盒式

密集波分复用器是将不同波长的光信号复用至一根光纤上(复用),或将复用在一根光纤中的多个光信道按波长分开(解复用)。100G/200G信道间隔密集光波分复用器/解复用器采用成熟的多腔介质膜实现光的滤波,波长稳定性好,采用密封工艺封装,环境稳定性高。

产品特点
● 宽带宽
● 光路无胶
● 高隔离度、低插入损耗
● 高稳定性和可靠性

产品应用
● DWDM网络系统
● 光纤放大器
● CATV光纤系统
● 业务上传或下载

技术参数

参数4通道8通道16通道
合波解波合波解波合波解波
工作波长 (nm)ITU Grid
通道间隔(GHz)100 / 200
带宽 (@-0.5dB 带宽 (nm)≥0.22(100G)/ ≥0.5(200G)
插入损耗(dB)≤1.8≤3.0低损≤3.5   标损≤5.0
隔离度(dB)相邻≥30
非相邻≥40
温度相关损耗(dB)≤0.5
波长热稳定度 (nm/℃)≤0.001
偏振相关损耗(dB)≤0.2
偏振摸色散(ps)≤0.1
方向性(dB)≥45
回波损耗(dB)≥45
最大功率(mW)300
工作温度(℃)-10~+70
储存温度(℃)-40~+85
包装尺寸(mm)L100×W80×H10L120×W80×H18
19″ 1U机箱

备注:以上参数不包含连接头

北亿纤通 | F-tone Networks
企业邮箱:sales@f-tone.com
企业手机:19081343401
企业电话:028-85255257
企业传真:028-85977702

注:本产品有全国产化型号可选
本产品为FT-13系列,仅展示部分参数,如有需要,请您联系我们。

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

Traffic Testing

测试误码率和丢包率,使其符合相应标准,确保收发器的性能。

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

端面测试

检查光纤收发模块的端面并保持清洁,以实现更稳定的数据传输、更好的性能和耐用性。

兼容品牌:

华为 | 华三 | 中兴 | 锐捷 | Cisco | Juniper | Arista | Brocade |HPE ProCurve | HPE Aruba | HPE BladeSystem | HPE H3C | H3C | Dell | Extreme | HW | Generic | F-tone | Intel | Netgear | IBM | NVIDIA/Mellanox (Ethernet) | Ciena | Fortinet | Avago | Avaya | Alcatel-Lucent | D-Link | F5 | Ubiquiti | Mikrotik |Broadcom…..

滚动至顶部