Features
● Smallsize
● Flat frequencyresponse
● Low powerconsumption
● Excellent EMI/EMCdesign
● Automatic optical powercontrol
● High dynamic input and outputrange
● Wide operating frequency from 100MHz to6GHz
Applications
● WiMAX / 4G /5G
● Mobilebackhaul
● GPS signaltransport
● All-Digital QAMnetwork
● Data and videodistribution
● Distributed antennasystem
Absolute Maximum Ratings
| Parameter | Symbol | Condition | Min. | Max. | Unit |
| Operating Temperature | Tc | -20 | +50 | °C | |
| Storage Temperature | Tstg | -40 | +85 | °C | |
| DC Operating Voltage（TX） | VD | -6 | |||
| DC Operating Voltage（RX） | VD | +6 | V | ||
| RF Input Power | PRF | 14 | dBm | ||
| Optical Input Power | ORF | 12 | dBm | ||
| Relative Humidity | HR | 95 | % | ||
| Pressure | PR | 86 | 106 | kpa | |
| ESD | Human body model | Class 1A |
Typical Specification
| Parameter | Test Condition | MIN. | TYP. | MAX. | Unit |
| Frequency Range | 100M ~ 6G | Hz | |||
| Optical Wavelength | Transmitter | optional | nm | ||
| Receiver | 1100~1620 | nm | |||
| Gain(1) | Tx No Gain, Rx No Gain | -30 | -26 | — | dB |
| Ripple of Passband | 100MHz ~ 6GHz | — | ±1.4 | ±3 | dB |
| Output Optical Power | +25℃ | — | 7 | — | dBm |
| Return loss (50 Ω) | 100MHz ~ 6GHz | — | -8 | -5 | dB |
| P-1 | Tx No Gain, Rx No Gain (3GHz) | — | 10 | — | dBm |
| SFDR(1) | Tx No Gain, Rx No Gain (3GHz) | 102 | 105 | — | dB·Hz2/3 |
| Input IP3(1) | Tx No Gain, Rx No Gain (3GHz) | 21 | 25 | — | dBm |
| Noise Figure(1) | Tx No Gain, Rx No Gain (3GHz) | — | 41 | 45 | dB |
| Phase Noise(1) | 500MHz，@10Hz | — | -100 | — | dBc/Hz |
| 500MHz，@100Hz | — | -110 | — | dBc/Hz | |
| 500MHz，@1KHz | — | -120 | — | dBc/Hz | |
| Power Consumption | -5V, Tx No Gain | — | 0.18 | 0.5 | W |
| +5V, Rx No Gain | — | 0.1 | 0.2 | W | |
| Operating Voltage | -5V@Tx，+5V@Rx | VDC | |||
Connector
| Type | Connector |
| RF | SSMA (,50Ω) |
| Optical | FC/APC |
| Optical Fiber Type | SMF-28(Standard) |
| Power & Monitor | EMI Low Pass FilterFeed Through Capacitor |
PIN Function
Optical Transmitter
| PIN | Name | Direction | Note |
| 1 | POWER | Ⅰ | -5V |
| 2 | GND | Ⅰ | GND |
Optical Receiver
| PIN | Name | Direction | Note |
| 1 | POWER | Ⅰ | +5V |
| 2 | GND | Ⅰ | GND |
Note: When using the module, the bottom of the module needs to be fully cooled.
Ordering Information
Optical Transmitter
| FTRFT | – | 0 | C | N | xxx | F | S | – | U | 000 |
| Transmitter | GainN: No Gain | CWDM Laser Wavelength270: 1270nm………………….370: 1370nm | Temperature RangeU: -20 to 50℃ |
Optical Receiver
| FTRFR | – | 0 | C | N | B00 | F | S | – | U | 000 |
| Receiver | GainN: No Gain | Wavelength Range1100nm ~ 1620nm | Temperature RangeU: -20 to 50℃ |
北亿纤通 | F-tone Networks
企业邮箱：sales@f-tone.com
企业手机：19081343401
企业电话：028-85255257
企业传真：028-85977702
注：本产品有全国产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.
光学性能测试
测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压，以确保信号质量、传输的稳定性和可靠性。
Traffic Testing
测试误码率和丢包率，使其符合相应标准，确保收发器的性能。
光学性能测试
测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压，以确保信号质量、传输的稳定性和可靠性。
端面测试
检查光纤收发模块的端面并保持清洁，以实现更稳定的数据传输、更好的性能和耐用性。
兼容品牌:
华为 | 华三 | 中兴 | 锐捷 | Cisco | Juniper | Arista | Brocade |HPE ProCurve | HPE Aruba | HPE BladeSystem | HPE H3C | H3C | Dell | Extreme | HW | Generic | F-tone | Intel | Netgear | IBM | NVIDIA/Mellanox (Ethernet) | Ciena | Fortinet | Avago | Avaya | Alcatel-Lucent | D-Link | F5 | Ubiquiti | Mikrotik |Broadcom…..
