200GBASE-FR4 QSFP56光模块

Description
F-tone Networks’s FTQ5-2H-FR4xx 200GE QSFP56 Optical Transceiver modules are designed for use in 200 Gigabit Ethernet links over SMF28 single-mode fiber. They are compliant with the QSFP MSA and with IEEE 802.3bs 200GBASE-FR4 specification. Digital diagnostics functions are available via the I2C interface as specified by ACMIS4.0. The transceiver is RoHS 2.0 compliant and lead-free per Directive 2011/65/EU.

Features
● Hot-pluggable QSFP56 form factor
● Built-in 200G PAM4 DSP
● Supports 212.5Gb/s aggregate bit rates
● Supports 103.1Gb/s aggregate bit rates if requiredNote1
● Maximum power dissipation < 7.0W
● RoHS-6 compliant (lead-free)
● Single 3.3V power supply
● Maximum link length of 2km on SMF
● Cooled 4 channels EA-DFB TOSA
● 4 channels PIN ROSA
● 200GAUI-4 electrical interface
● Compliant with CMIS V4.0 Note1
● I2C management interface
● Built-in digital diagnostic functionality
● Case operating temperature
     Commercial: 0 ~ +70℃
     Industrial: -40 ~ +85℃

Applications
● IEEE 802.3bs 200GBASE-FR4 Ethernet (PAM4)
● 5G Back-haul
● Data center

Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Supply VoltageVcc-0.33.6V
Input VoltageVin-0.3Vcc+0.3V
Storage TemperatureTs-2085ºC
Case Operating TemperatureTc070ºC
Humidity (non-condensing)Rh595%

Recommended Operating Conditions

ParameterSymbolMinTypicalMaxUnit
Supply VoltageVcc3.133.33.47V
Operating Case TemperatureTc070ºC
Baud Rate per Lane (PAM4)fd26.5625GBaud/s
HumidityRh585%
Power DissipationPm6.87.5W

Electrical Specifications

ParameterSymbolMinTypicalMaxUnit
Differential Input ImpedanceZin90100110ohm
Differential Output ImpedanceZout90100110ohm
Differential Input Voltage AmplitudeΔVin300900mVpp
Differential Output Voltage AmplitudeΔVout300900mVpp
Bit Error RateBER2.4E-4
Input Logic Level HighVIH2.0VccV
Input Logic Level LowVIL00.8V
Output Logic Level HighVOHVcc-0.5VccV
Output Logic Level LowVOL00.4V

Optical Characteristics 

ParameterSymbolMinTypicalMaxUnit
Transmitter
Center WavelengthL11264.512711277.5nm
Center WavelengthL21284.512911297.5nm
Center WavelengthL31304.513111317.5nm
Center WavelengthL41324.513311337.5nm
SMSRSMSR30nm
Average Launch Power (each lane)Pout-4.24.7dBm
Average Launch Power (total)Ptatal10.7dBm
Outer Optical Modulation Amplitude (each lane)OMAout-1.24.5dBm
Launch power in OMAouter minus TDECQPtdecq-2.6dBm
Transmitter and dispersion eye closure (each lane)TDECQ3.3dB
Average launch power of off transmitter(each lane)Poff-30dBm
Outer Extinction RatioER3.5dB
Optical Return Loss ToleranceORLT16.5dB
Receiver
Center WavelengthL11264.512711277.5nm
Center WavelengthL21284.512911297.5nm
Center WavelengthL31304.513111317.5nm
Center WavelengthL41324.513311337.5nm
Damage thresholdRdam5.7dBm
Average Receive Power (each lane)Input (each lane)Pin-8.24.7dBm
Receiver Power (OMAouter) (each lane)OMAout4.5dBm
Receiver reflectancePref-26dB
Stressed Receiver Sensitivity (OMAouter) (each lane)Sens-3.6dBm
Receiver Sensitivity (OMAouter) (each lane) Note2Sen-6dBm

Note:Note2. Measured with conformance test signal at TP3 for the BER specified in IEEE 802.3bs.

Mechanical Dimensions

Ordering Information

Part NumberProduct Description
FTQ5-2H-FR4QSFP56, 200GBASE-FR4 Transceiver, 2km over SMF, PAM4 DSP inside,0ºC ~ +70ºC
FTQ5-2H-FR4IQSFP56, 200GBASE-FR4 Transceiver, 2km over SMF, PAM4 DSP inside,-40ºC ~ +85ºC

北亿纤通 | F-tone Networks

企业邮箱: sales@f-tone.com
企业手机:19081343401
企业电话:028-85255257
企业传真:028-85977702

注:本产品有全国产化型号可选

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

Traffic Testing

测试误码率和丢包率,使其符合相应标准,确保收发器的性能。

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

端面测试

检查光纤收发模块的端面并保持清洁,以实现更稳定的数据传输、更好的性能和耐用性。

兼容品牌:

华为 | 华三 | 中兴 | 锐捷 | Cisco | Juniper | Arista | Brocade |HPE ProCurve | HPE Aruba | HPE BladeSystem | HPE H3C | H3C | Dell | Extreme | HW | Generic | F-tone | Intel | Netgear | IBM | NVIDIA/Mellanox (Ethernet) | Ciena | Fortinet | Avago | Avaya | Alcatel-Lucent | D-Link | F5 | Ubiquiti | Mikrotik |Broadcom…..

滚动至顶部