100GBASE-SR4 QSFP28 Optical Transceiver for liquid cooling - 北亿纤通|F-tone Networks-全球光芯片光器件光模块光通信系统产品领导者!

Description
The F-tone Networks 100G QSFP28 SR4 (FTQ2-HG-SR4-M2-xxx) is designed for use in 100-Gigabit Ethernet links up to 100m over Multi-Mode Fiber (MMF) especially for liquid immersion environment. It is compliant with the QSFP28 MSA and IEEE 802.3bm 100GBASE-SR4 and CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA. It integrates 4 data lanes in each direction with 4×25.78125Gb/s bandwidth. The electrical interface uses a 38-contact edge type connector. The optical interface uses a single male MPO-12 pigtail. This module incorporates F-tone Networks proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

Features
● Hot-pluggable QSFP28 form factor
● 4 channels full-duplex transceiver module
● Supports 103.125Gb/s aggregate bit rate
● 4 channels 850nm VCSEL array
● 4 channels PIN photo-detector array
● Internal CDR circuits on both receiver and transmitter channels
● Supports CDR bypass
● 2W maximum power dissipation
● Maximum link length of 70m on OM3 MMF and 100m on OM4 MMF
● Single male MPO-12 pigtail
● Single 3.3V power supply
● RoHS compliant (lead free)
● Case operating temperature
Commercial: 0 ~ +60℃
Industrial: -40 ~ +85℃

Applications
● 100GBASE-SR4 100G Ethernet
● Especially design for liquid immersion environment

Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Supply Voltage	V_cc	-0.3	3.6	V
Input Voltage	V_in	-0.3	Vcc+0.3	V
Storage Temperature	T_s	-20	85	ºC
Case Operating Temperature	T_c	0	60	ºC
Humidity (non-condensing)	Rh	5	95	%

Recommended Operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	V_cc	3.13	3.3	3.47	V
Operating Case temperature	T_c	0		60	ºC
Data Rate Per Lane	fd		25.78125		Gb/s
Humidity	Rh	5		85	%
Power Dissipation	P_m			2	W
Fiber Bend Radius	R_b	3			cm
Liquid immersion depth				10	m

Electrical Specifications

Parameter	Symbol	Min	Typical	Max	Unit
Differential Input Impedance	Z_in	90	100	110	ohm
Differential Output Impedance	Z_out	90	100	110	ohm
Differential Input Voltage Amplitude¹	ΔV_in	300		1100	mVp-p
Differential Output Voltage Amplitude²	ΔV_out	500		800	mVp-p
Skew	Sw			300	ps
Bit Error Rate	BER		5×10-5
Input Logic Level High	V_IH	2.0		V_cc	V
Input Logic Level Low	V_IL	0		0.8	V
Output Logic Level High	V_OH	V_cc-0.5		V_cc	V
Output Logic Level Low	V_OL	0		0.4	V

Note:

Differential input voltage amplitude is measured between TxnP and TxnN.
Differential output voltage amplitude is measured between RxnP and RxnN.

Optical Characteristics

Parameter	Symbol	Min	Typical	Max	Unit
Transmitter
Center Wavelength	λc	840	850	860	nm
RMS Spectral Width	∆λ			0.6	nm
Average Launch Power (each lane)	P_out	-8.4		2.4	dBm
Optical Modulation Amplitude (each lane)	OMA	-6.4		3	dBm
Transmitter and Dispersion Eye Closure (each lane)	TDEC			4.3	dB
Extinction Ratio	ER	3			dB
Average Launch Power of OFF Transmitter (each lane)	P_off			-30	dB
Eye Mask Coordinates¹: X1, X2, X3, Y1, Y2, Y3	{0.3, 0.38, 0.45, 0.35, 0.41, 0.5}
Receiver
Center Wavelength	λ_c	840	850	860	nm
Stressed Receiver Sensitivity in OMA²				-5.2	dBm
Average Power at ReceiverInput (each lane)		-10.3		2.4	dBm
Receiver Reflectance	R_R			-12	dB
LOS Assert	LOS_A	-30			dBm
LOS De-Assert – OMA	LOS_D			-7.5	dBm
LOS Hysteresis	LOS_H	0.5			dB

Note:

Hit Ratio = 5×10^-5
Measured with conformance test signal at TP3 for BER=10^-5

Mechanical Dimensions

Ordering Information

Part Number	Product Description
FTQ2-HG-SR4-M2-xxx	QSFP28 SR4, 103.125Gb/s, male MTP pigtail ,liquid immersion,0ºC ~ +60ºC
FTQ2-HG-SR4-M2-xxxI	QSFP28 SR4, 103.125Gb/s, male MTP pigtail ,liquid immersion,-40ºC ~ +85ºC

北亿纤通 | F-tone Networks

企业邮箱： sales@f-tone.com
企业手机：19081343401
企业电话：028-85255257
企业传真：028-85977702

注：本产品有全国产化型号可选

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.