CPRI 100G QSFP28-SR4光模块

Description
The F-tone Networks FTQ2-HG-SR4I-CPRI is a Four-Channel, Pluggable, Fiber-Optic SQFP28 for 4*24.33 Gigabit 5G eCPRI QSFP28 SR4(Industrial Grade)Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications.Each lane can operate at 24.33Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP (MPO) connector. This module incorporates F-tone Networks proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

Features
● Hot-pluggable QSFP28 form factor
● 4 channels full-duplex transceiver module
● Supports 4*24.33Gb/s bit rate
● 4 channels 850nm VCSEL array
● 4 channels PIN photo-detector array
● Internal CDR circuits on both receiver and transmitter channels
● 2W maximum power dissipation
● Maximum link length of 70m on OM3 MMF and 100m on OM4 MMF
● Single MTP/MPO receptacle
● Built-in digital diagnostic functions
● Operating case temperature range: -40°C to 85°C
● 3.3V power supply voltage
● RoHS 6 compliant (lead free)

Applications
● 5G eCPRI QSFP28 SR4(Industrial grade)

Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Supply VoltageVcc-0.33.6V
Input VoltageVin-0.3Vcc+0.3V
Storage TemperatureTs-2085ºC
Case Operating TemperatureTc-4085ºC
Humidity (non-condensing)Rh595%

Recommended Operating Conditions

ParameterSymbolMinTypicalMaxUnit
Supply VoltageVcc3.133.33.47V
Operating Case TemperatureTc-4085ºC
Data Rate Per Lanefd24.33Gb/s
HumidityRh585%
Power DissipationPm2W
Fiber Bend RadiusRb3cm

Electrical Specifications

ParameterSymbolMinTypicalMaxUnit
Differential Input ImpedanceZin90100110ohm
Differential Output ImpedanceZout90100110ohm
Differential Input Voltage Amplitude1ΔVin3001100mVp-p
Differential Output Voltage Amplitude2ΔVout500800mVp-p
SkewSw300ps
Bit Error RateBER5×10-5
Input Logic Level HighVIH2.0VccV
Input Logic Level LowVIL00.8V
Output Logic Level HighVOHVcc-0.5VccV
Output Logic Level LowVOL00.4V

Note:

  • Differential input voltage amplitude is measured between TxnP and TxnN.
  • Differential output voltage amplitude is measured between RxnP and RxnN.

Optical Characteristics 

ParameterSymbolMinTypicalMaxUnit
Transmitter
Center Wavelengthλc840850860nm
RMS Spectral Width∆λ0.6nm
Average Launch Power (each lane)Pout-8.42.4dBm
Optical Modulation Amplitude (each lane)OMA-6.43dBm
Transmitter and Dispersion Eye Closure (each lane)TDEC4.3dB
Extinction RatioER3dB
Average Launch Power of OFF Transmitter (each lane)Poff-30dB
Eye Mask Coordinates1: X1, X2, X3, Y1, Y2, Y3{0.3, 0.38, 0.45, 0.35, 0.41, 0.5}
Receiver
Center Wavelengthλc840850860nm
Stressed Receiver Sensitivity in OMA2-5.2dBm
Average Power at ReceiverInput (each lane)-10.32.4dBm
Receiver ReflectanceRR-12dB
LOS AssertLOSA-30dBm
LOS De-Assert – OMALOSD-7.5dBm
LOS HysteresisLOSH0.5dB

Note:

  • Hit Ratio = 5×10-5
  • Measured with conformance test signal at TP3 for BER=5E-5

Mechanical Dimensions

Ordering Information

Part NumberProduct Description
FTQ2-HG-SR4I-CPRICPRI QSFP28 SR4, 4*24.33Gb/s, 850nm, 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF , MTP/MPO

北亿纤通 | F-tone Networks

企业邮箱: sales@f-tone.com
企业手机:19081343401
企业电话:028-85255257
企业传真:028-85977702

注:本产品有全国产化型号可选

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative. from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.tworks sales representative.e Networks sales representative.tive.s or others. Further details are available from any F-tone Networks sales representative.y F-tone Networks sales representative.

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

Traffic Testing

测试误码率和丢包率,使其符合相应标准,确保收发器的性能。

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

端面测试

检查光纤收发模块的端面并保持清洁,以实现更稳定的数据传输、更好的性能和耐用性。

兼容品牌:

华为 | 华三 | 中兴 | 锐捷 | Cisco | Juniper | Arista | Brocade |HPE ProCurve | HPE Aruba | HPE BladeSystem | HPE H3C | H3C | Dell | Extreme | HW | Generic | F-tone | Intel | Netgear | IBM | NVIDIA/Mellanox (Ethernet) | Ciena | Fortinet | Avago | Avaya | Alcatel-Lucent | D-Link | F5 | Ubiquiti | Mikrotik |Broadcom…..

滚动至顶部