SFP-DD Transceiver,100G,LR1,10km

Description
The F-tone Networks 100G LR1 SFP56-DD optical transceiver, 100G SFP56-DD LR1 (SFP56-DD-LR) is designed for using in 100-Gigabit Ethernet links up to 10km over Single-Mode Fiber (SMF). It is compliant with the SFP56-DD MSA,IEEE802.3CU,100G Lambda 100G LR1 and CAUI-4(no FEC)¹. Digital diagnostics functions are available via the I2C interface, as specified by the SFP56-DD MSA.

The module incorporates 1 channel optical signal, on 1311nm center wavelength, operating at 100Gbps data rate. This module can convert 2 channels of 53Gbps (PAM4) electrical input data to 1 channel of 106Gbps (PAM4) optical signal, and also can convert 1 channel of 106Gbps (PAM4) optical signal to 2 channels of 53Gbps (PAM) electrical output data. The optical interface uses a Duplex LC connector. The high performance cooled EML transmitter and high sensitivity PIN receiver provide superior performance for 100Gigabit Ethernet applications up to 10km links.

Features

• Compliantto 100G Lambda MSA 100G LR1-10
• Full-duplex transceivermodule
• 25Gb/s(PAM4) optical interface
• 125Gb/s(PAM4) electrical interface
• 1025Gbps PAM4 based on a cooledEML TOSA transmitter
• 1025Gbps PAM4 PINReceiver
• 5W maximum power dissipation
• Hot-pluggable SFP56-DDform factor
• Maximum link length of 10km on G.652 SMF with KP-FEC
• Duplex LC receptacles
• Built-in digital diagnostic functions
• Operating case temperature range: 0 to 70°C
• Single 3.3V power supply
• RoHScompliant(lead free)

Applications

• 100G Lambda 100G LR1-10
• 3CU

Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Supply Voltage	Vcc	-0.3	3.6	V
Input Voltage	Vin	-0.3	Vcc+0.3	V
Storage Temperature	Ts	-20	85	ºC
Case Operating Temperature	Tc	0	70	ºC
Humidity (non-condensing)	Rh	5	85	%

Recommended Operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	3.13	3.3	3.47	V
Operating Case temperature	Tc	0	–	70	ºC
Data Rate Per Lane	fd	–	106.25	–	Gb/s
Humidity	Rh	5	–	85	%
Power Dissipation	Pm	–	3	3.5	W
Link Distance with G.652	D	–	–	10	km

Electrical Specifications

Parameter	Symbol	Min	Typical	Max	Unit
Differential Input Impedance	Zin	90	100	110	ohm
Differential Output Impedance	Zout	90	100	110	ohm
Differential Input Voltage Amplitude1	ΔVin	–	–	1600	mVp-p
Differential Output Voltage Amplitude2	ΔVout	–	–	900	mVp-p

Note:

• Differential input voltage amplitude is measured between TxnP and TxnN.
• Differential output voltage amplitude is measured between RxnP and RxnN.

Optical Characteristics

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Transmitter
Centre Wavelength	λc	1304.5	–	1317.5	nm	–
Side-mode suppression ratio	SMSR	30	–	–	dB	–
Average launch power	Pout	-1.4	–	4.5	dBm	–
Transmitter and dispersion eye closure(TDECQ)	TDECQ	–	–	3.4	dB
Extinction Ratio	ER	3.5	–	–	dB	–
Average launch power of OFF transmitter		–	–	-30	dB	–
Receiver
Centre Wavelength	λc	1304.5	–	1317.5	nm	–
Receiver Sensitivity in  OMA outer	RXsen	–	–	-6.1	dBm	1
Average receive power	Pin	-7.7	–	4.5	dBm	–
Receiver Reflectance		–	–	-26	dB	–
LOS Assert		–	-13	–	dBm	–
LOS De-Assert – OMA		–	-11	–	dBm	–
LOS Hysteresis		0.5	–	–	dB	–

Note:Measured with conformance test signal at TP3 for BER = 2.4E-4 Pre-FECs

Mechanical Dimensions

Ordering information

Part Number	Product Description
SFP56-DD-LR	SFP56-DD LR1, 106.25Gb/s, 10km, EML+PIN, SMF, Dual LC

北亿纤通 | F-tone Networks

企业邮箱： sales@f-tone.com
企业手机：19081343401
企业电话：028-85255257
企业传真：028-85977702

注：本产品有全国产化型号可选
本产品为SFP-DD系列光模块，仅展示部分参数，如有需要，请联系我们。

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.e Networks sales representative.tive.s or others. Further details are available from any F-tone Networks sales representative.y F-tone Networks sales representative.