Features
● Low noise
● Small size
● Flat frequency response
● High dynamic range
● Excellent EMI/EMC design
● Wide operating frequency from 100MHz to 18GHz
● APC&ATC maintain small vibration of output power and IP3
Applications
● Delay line
● Antenna remoting
● Secure communication
● OFDM fiber transmission
● Distributed antenna system
● Wideband wireless communication
Absolute Maximum Ratings
| Parameter | Symbol | Condition | Min. | Max. | Unit |
| Operating Temperature | Tc | -20 | +50 | °C | |
| Storage Temperature | Tstg | -40 | +85 | °C | |
| DC Operating Voltage | VD | -6V@Tx>+6V@Rx> | V | ||
| RF Input Power | PRF | 20 | dBm | ||
| Relative Humidity | HR | 95 | % | ||
| Pressure | PR | 86 | 106 | kpa | |
| ESD | Human body model | Class 1A |
Typical Specification (@25°C)
| Parameter | Test Condition | MIN. | TYP. | MAX. | Unit |
| Frequency Range | 100M ~ 18G | Hz | |||
| Optical Wavelength | Transmitter | optional | nm | ||
| Output Optical Power | +25℃ | — | 10 | — | dBm |
| Gain | 10GHz Tx no Gain, Rx no Gain | -30 | -28 | — | dB |
| Ripple of Passband | 100MHz ~ 10GHz | — | ±1 | ±2 | dB |
| 10GHz ~ 16GHz | — | ±0.5 | ±2 | dB | |
| 16GHz ~ 18GHz | — | ±0.5 | ±2 | dB | |
| Input Return Loss (50 Ω) | 100MHz ~ 12GHz | — | -10 | -8 | dB |
| 12GHz ~ 18GHz | — | -6 | -5 | dB | |
| P-1 | 1GHz | — | 18 | — | dBm |
| SFDR | 1GHz | 110 | 115 | — | dB·Hz2/3 |
| 10GHz | 105 | 110 | — | dB·Hz2/3 | |
| 18GHz | 100 | 103 | — | dB·Hz2/3 | |
| Input IP3 | 1GHz | 30 | 34 | — | dBm |
| 10GHz | 28 | 32 | — | dBm | |
| 18GHz | 23 | 27 | — | dBm | |
| Noise Figure | 1GHz | — | 33 | 35 | dB |
| 10GHz | — | 41 | 45 | dB | |
| 18GHz | — | 46 | 50 | dB | |
| Power Consumption | +5V, TX no Gain | — | — | 4.0 | W |
| -5V | — | 0.35 | 0.5 | W | |
| Operating Voltage | +5V, -5V | VDC |
Note: With F-tone Optical Receiver and 1.0 meter SMF -28 single-mode fiber.
Connector
| Type | Connector |
| RF | K (2.92mm,50Ω) |
| Optical | FC/APC |
| Optical Fiber Type | SMF-28(Standard) |
| Power | EMI Low Pass FilterFeed Through Capacitor |
PIN Function
Optical Transmitter
| PIN | Name | Direction | Note |
| 1 | POWER | Ⅰ | +5V |
| 2 | POWER | Ⅰ | -5V |
| 3 | GND | Ⅰ | GND |
| 4 | SMA | Ⅰ | RF in |
Mechanical (unit: mm)
Ordering Information
Optical Transmitter
| FTRFT | – | 0 | Y | N | xxx | F | K | – | U | 000 |
| Transmitter | Gain N: No Gain | Laser Wavelength270：1270nm ………………….. 370: 1370nm | temperature rangeU: -20 to 50℃ |
北亿纤通 | F-tone Networks
企业邮箱：sales@f-tone.com
企业手机：19081343401
企业电话：028-85255257
企业传真：028-85977702
注：本产品有全国产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.
光学性能测试
测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压，以确保信号质量、传输的稳定性和可靠性。
Traffic Testing
测试误码率和丢包率，使其符合相应标准，确保收发器的性能。
光学性能测试
测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压，以确保信号质量、传输的稳定性和可靠性。
端面测试
检查光纤收发模块的端面并保持清洁，以实现更稳定的数据传输、更好的性能和耐用性。
兼容品牌:
华为 | 华三 | 中兴 | 锐捷 | Cisco | Juniper | Arista | Brocade |HPE ProCurve | HPE Aruba | HPE BladeSystem | HPE H3C | H3C | Dell | Extreme | HW | Generic | F-tone | Intel | Netgear | IBM | NVIDIA/Mellanox (Ethernet) | Ciena | Fortinet | Avago | Avaya | Alcatel-Lucent | D-Link | F5 | Ubiquiti | Mikrotik |Broadcom…..
