2×10 SFF 1.25Gbps 数字诊断监控光模块

产品描述
F-tone 的 FTBF-1312-20DI-GC 系列光模块是低速通信网络的完美解决方案。该系列光模块支持高达1500Mbps的数据传输速率。该模块完全符合小型外形因素多来源协议(MSA)定义的2X10标准封装。该系列光模块为系统设计师提供了用于电信、数据通信和其他光纤通道应用的解决方案。

产品特点
● VESEL/FP/DFB激光二极管发射器
● 适用于62.5/125μm多模光纤可达2公里,适用于9/125μm单模光纤可达100公里
● 3.3V电源
● LC双工光学接口
● (LV) CML差分输入/输出和 (LV)TTL信号检测
● 满足国际安全标准IEC 825的1类激光器
● 工作环境温度范围(标准:0到70℃)或(工业:-40至85°C)

应用场景
● 光纤通道交换机基础设施
● 千兆以太网交换机和路由器
● 其他光链路
1111 71111 81111 91111 101111 111111 12

1111 13

北亿纤通 | F-tone Networks

企业邮箱:sales@f-tone.com
企业手机:19081343401
企业电话:028-85255257
企业传真:028-85977702

注:本产品有全国产化型号可选
本产品为FT-VW系列1*9光模块,仅展示部分参数,如有需要,请联系我们。

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

Traffic Testing

测试误码率和丢包率,使其符合相应标准,确保收发器的性能。

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

端面测试

检查光纤收发模块的端面并保持清洁,以实现更稳定的数据传输、更好的性能和耐用性。

兼容品牌:

华为 | 华三 | 中兴 | 锐捷 | Cisco | Juniper | Arista | Brocade |HPE ProCurve | HPE Aruba | HPE BladeSystem | HPE H3C | H3C | Dell | Extreme | HW | Generic | F-tone | Intel | Netgear | IBM | NVIDIA/Mellanox (Ethernet) | Ciena | Fortinet | Avago | Avaya | Alcatel-Lucent | D-Link | F5 | Ubiquiti | Mikrotik |Broadcom…..

滚动至顶部