
FEATURES:
- Up to 25.78 Gbps data rate per channel by NRZ modulation
- Support 200GAUI-8 electrical interface
- Integrated 850nm VCSEL array and PD array
- Hot-pluggable QSFP-DDform factor
- MPO-16 APC connector
- Compliant to QSFP-DD HW
- Compliant with CMIS 4.0
- Maximum power consumption 5W
- Single 3.3V power supply
- Case operating temperature 0°C to 70°C
- Class 1 laser
- RoHS complaint
Absolute Maximum Ratings
| Parameter | Symbol | Min | Max | Unit | Notes |
| Storage Temperature | TS | -40 | 85 | ºC | |
| Power Supply Voltage | VCC | -0.3 | 3.6 | V | |
| Control Input Voltage | VI | -0.3 | 3.465 | V | |
| Relative Humidity (non-condensing) | RH | 15 | 85 | % |
Recommended Operating Conditions
| Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
| Operating Case Temperature | TOPR | 0 | – | 70 | ºC | |
| Power Supply Voltage | VCC | 3.135 | 3.3 | 3.465 | V | |
| Maximum Power Consumption | Pmax | 4.5 | W | |||
| Signaling Rate per Lane | SRL | – | 25.78 | – | Gbps | |
| Rx Differential Data Output Load | – | – | 100 | – | Ohm | |
| Operating Distance (OM3) | – | – | 70 | m | ||
| Operating Distance (OM4) | – | – | 100 | m |
Transmitter Optical Specifications
| Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
| Center Wavelength | λC | 840 | 850 | 860 | nm | |
| RMS spectral width | ∆λrms | 0.6 | nm | |||
| Average launch power, each lane | AOPL | -6.4 | 3 | dBm | ||
| Optical Modulation Amplitude (OMAouter), each lane | TOMA | -6.4 | 3.5 | dBm | ||
| Average Launch Power of OFF Transmitter, each lane | ToFF | -30 | dBm | |||
| Extinction ratio, each lane | ER | 2 | – | – | dB | |
| Optical return loss tolerance | – | – | -12 | dB | ||
| Transmitter Eye mask definition Eye mask definition {X1, X2, X2, Y1, Y2, Y3} | {0.3,0.38,0.45,0.35,0.41,0.5} | |||||
Receiver Optical Specifications
| Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
| Center Wavelength | λC | 840 | – | 860 | nm | |
| Damage threshold | 3.4 | dBm | ||||
| Average Receive Power,each lane | -10.3 | 2.4 | dBm | |||
| Stressed Receiver sensitivity (OMA) | SOMA | -5.2 | dBm | |||
| Receiver reflectance | -12 | dB | ||||
| LOS Assert | LOSA | -30 | dBm | |||
| LOS De-Assert | LOSD | -10.5 | dBm | |||
| LOS Hysteresis | LOSH | 0.5 | dB |
Electrical Specifications
| Transmitter Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
| Eye width | 0.57 | 17.5 | UI | |||
| Eye height(differential) | 228 | 900 | mV | |||
| Vertical eye closure | VEC | 5.5 | dB | |||
| Transition time (20% to 80%) | tr,tf | 12 | ps |
Mechanical Dimensions


Active fiber ports in MPO-16 connector on module side
Ordering Information
| Part Number | Description |
| FTQD-2H-SR8 | · 200Gb/s, QSFP-DD SR8, multi-mode, MPO16,0°C to 70°C |
北亿纤通 | F-tone Networks
企业邮箱: sales@f-tone.com
企业手机:19081343401
企业电话:028-85255257
企业传真:028-85977702
注:本产品有全国产化型号可选
本产品为QSFP-DD系列光模块,仅展示部分参数,如有需要,请联系我们。
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

光学性能测试
测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。
Traffic Testing
测试误码率和丢包率,使其符合相应标准,确保收发器的性能。


光学性能测试
测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。
端面测试
检查光纤收发模块的端面并保持清洁,以实现更稳定的数据传输、更好的性能和耐用性。


兼容品牌:
华为 | 华三 | 中兴 | 锐捷 | Cisco | Juniper | Arista | Brocade |HPE ProCurve | HPE Aruba | HPE BladeSystem | HPE H3C | H3C | Dell | Extreme | HW | Generic | F-tone | Intel | Netgear | IBM | NVIDIA/Mellanox (Ethernet) | Ciena | Fortinet | Avago | Avaya | Alcatel-Lucent | D-Link | F5 | Ubiquiti | Mikrotik |Broadcom…..

