SFP28 MWDM 光模块,10Km

Description
The F-tone Networks SFP28 MWDM 10km Transceiver is a “Limiting module”, designed for CPRI option10,25GBASE, link length up to 10km on G.652 SMF, link budget can reach 15dB.They are compliant with SFF-8431 Rev 4.1, SFF-8432 and SFF-8472 Rev 12.3.The transmitter section incorporates a DML laser，and the receiver section consists of a PIN photodiode integrated with TIA.
Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as case temperature, laser bias current, transmitted optical power, and received optical power and module supply voltage.

Features
● Hot-pluggable SFP28 form factor
● Supports CPRI wireless data rate
● Cooled DML transmitter and PIN receiver
● 7nm channel spacing MWDM systems
● Internal CDR circuits on both receiver and transmitter channels
● Maximum power dissipation：2W
● Maximum link length：10Km on SMF
● Duplex LC connector
● Operating case temperature range: -40 to +85°C
● Single 3.3V power supply
● RoHS compliant (lead free)

Applications
● CPRI Option 10、eCPRI
● 25G Ethernet

Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Supply Voltage	Vcc	-0.5	+3.8	V
Operating Case temperature	Top	-40	+85	ºC
Operating Relative Humidity	RHop	0	85	%
Storage and Transportation Temperature	Tst	-40	+85	ºC
Storage and TransportationRelative Humidity	–	0	85	%
Max Link Length	Lmax		10	km

Operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	3.13	3.3	3.47	V
Supply current	Icc	–	450	–	mA
Operating Case temperature	Tca	-40	–	+85	ºC
Module Power Dissipation [1]	Pm	–	–	2	W
ESD(High speed pins) [2]	–	–	–	1000	V

Notes:
[1].Power consumption over -40~85℃ case temperature and BOL
[2].Human body model per JEDEC JESD22-A114-B,compliant with INF-077i Rev.4.5 August 31,2005

Transmitter Optical Specifications

Parameter	Symbol	Min	Typical	Max	Unit
Laser Safety	ClassⅠaccording to IEC60825
Optical Wavelength	λ	1267.5，1274.5，1287.5，1294.5，1307.5，1314.5，1327.5，1334.5，1347.5，1354.5，1367.5，1374.5			nm
Data rate	BR	24.33	25.78125	–	Gbps
Wavelength Deviation	Δλ	-2.5		+2.5	nm
Average Optical Power [1]	Pout	2	–	7	dBm
Optical Transmit Power (disabled)	Pout_off	–	–	-30	dBm
Spectral Width (-20dB)	Δλ20	–	–	1	nm
Side Mode Suppression Ratio [2]	SMSR	30	–	–	dB
Extinction Ratio	ER	3.5	–	–	dB

Notes:
[1].Average power measured at output over the operating temperature
[2].Ratio of the average output power in the dominant longitudinal mode to the power in the most significant side mode peak under full modulation condition
Laser Safety: All transceivers in this datasheet are ClassⅠLaser products per FDA/CDRH and IEC-60825 standards. They must be operated under specified operating conditions.

Receiver Optical Specifications

Parameter	Symbol	Min	Typical	Max	Unit	Note
Input Operating Wavelength	λ	1260	–	1620	nm
Data rate	BR	24.33	25.78125	–	Gbps
Maximum Input Power	RX-overload	2	–		dBm
Average Receive Power	Pavg	-13		2	dBm
Sensitivity(OMA)	Rsen1[1]	–	–	-14	dBm
Sensitivity(OMA)	Rsen2[2]			-14	dBm
Loss of Signal Asserted	LOSA	-30	–	–	dBm
LOS De-Asserted	LOSD	–	–	-15	dBm
LOS Hysteresis	LOSH	0.5	–		dB

Notes:
[1] Measured with PRBS 2^31-1,BER <5E^-5, 24.33Gbps.
[2] Measured with PRBS 2^31-1,BER <5E^-5, 25.78Gbps.

Transmitter Specifications – Electrical

Parameter	Symbol	Min	Typical	Max	Unit
Data Rate	BR	24.33	25.78125	–	Gbps
Input differential impedance	Rim	80	100	120	Ω
Differential data Input	VtxDIFF	–	–	900	mVpp
Transmit Disable Voltage	VD	2.0	–	Vcc+0.3	V
Transmit Enable Voltage	Ven	-0.3	–	+0.8	V
Transmit Disable Assert Time	t_off	–	–	100	us
Tx Enable Assert Time	t_on	–	–	2	ms
Tx_Fault Assert Time for cooled SFP28	Tx_f_on	–	–	50	ms
Tx_Fault Reset Time [1]	t_reset	10	–	–	us
Initialization Time for cooled SFP28	t_start_up	–	–	10	s

Notes:
[1] Time Tx_Disable must be held high to reset Tx_Fault

Receiver Specifications – Electrical

Parameter	Symbol	Min	Typical	Max	Unit
Data Rate	BR	–	25.78125	–	Gbps
Differential Output Impedance	Rout	80	100	120	Ω
Differential Output Swing	Vout P-P	–	–	900	mVpp
Rise/Fall Time	Tr / Tf	9.5	–	–	ps
Loss of Signal –Asserted	VOH	2	–	Vcc+0.3	V
Loss of Signal –Negated	VOL	0	–	+0.4	V
LOS Assert/Deassert Time Delay	T_los on/off	–	–	100/100	us

Mechanical Dimensions
F-tone Networks FTCS-Mxx25G-10DI SFP28 Transceiver are compatible with the SFF-8432 specification for improved pluggable form factor, and shown here for reference purposes only.

Ordering information

Part Number	Product Description
FTCS-M2625G-10DI	25Gbps 10km MWDM SFP28,-40~+85ºC,1267.5nm, blue
FTCS-M2725G-10DI	25Gbps 10km MWDM SFP28,-40~+85ºC,1274.5nm, red
FTCS-M2825G-10DI	25Gbps 10km MWDM SFP28,-40~+85ºC,1287.5nm, blue
FTCS-M2925G-10DI	25Gbps 10km MWDM SFP28,-40~+85ºC,1294.5nm, red
FTCS-M3025G-10DI	25Gbps 10km MWDM SFP28,-40~+85ºC,1307.5nm, blue
FTCS-M3125G-10DI	25Gbps 10km MWDM SFP28,-40~+85ºC,1314.5nm, red
FTCS-M3225G-10DI	25Gbps 10km MWDM SFP28,-40~+85ºC,1327.5nm, blue
FTCS-M3325G-10DI	25Gbps 10km MWDM SFP28,-40~+85ºC,1334.5nm, red
FTCS-M3425G-10DI	25Gbps 10km MWDM SFP28,-40~+85ºC,1347.5nm, blue
FTCS-M3525G-10DI	25Gbps 10km MWDM SFP28,-40~+85ºC,1354.5nm, red
FTCS-M3625G-10DI	25Gbps 10km MWDM SFP28,-40~+85ºC,1367.5nm, blue
FTCS-M3725G-10DI	25Gbps 10km MWDM SFP28,-40~+85ºC,1374.5nm, red

北亿纤通 | F-tone Networks

企业邮箱：sales@f-tone.com
企业手机：19081343401
企业电话：028-85255257
企业传真：028-85977702

注：本产品有全国产化型号可选

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.s or others. Further details are available from any F-tone Networks sales representative.y F-tone Networks sales representative.