SFP Transceiver,MM,1310nm,155M,2km

Features
● Up to 155Mbps data rate
● 2Km Reach for 50/125um (550MHz.km)
● Duplex LC receptacle optical interface compliant
● Single +3.3V power supply
● DDMI function available with internally calibrated mode
● Hot-pluggable
● Receiver loss of signal output
● Transmitter disable input
● International Class1 laser safety certified
● Operating temperature range:
     Commercial: -5°C~70°C
     Industrial: -40°C~85°C
● RoHS Compliant

Application
● Gigabit Ethernet
● 1x Fiber Channel
● Switch to Switch Interface
● Other Optical Links

Standard
● Compliant with SFP MSA (INF-8074i)
● Compliant with SFF-8472
● Compliant with IEEE 802.3z

Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Storage temperature	TS	-40	85	°C
Power Supply Voltage	VCC	0	3.6	V
Relative Humidity	RH	5	95	%

Recommended Operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Operating Case Temperature	TC	-5		70	°C	FTCS-M1303-02D
		-40		85		FTCS-M1303-02DI
Power Supply Voltage	VCC	3.13	3.3	3.47	V
Data Rate			155		Mbps
Fiber Length 62.5/125μm coreMMF (550MHz.km)				2	Km

Electrical Characteristics

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Total Supply Current	ICC			300	mA
Transmitter
Transmitter Differential Input Voltage		400		2400	mV
Tx_Fault Output Voltage – High	VOH	2.4		Vcc	V	LVTTL
Tx_Fault Output Voltage – Low	VOL	0		0.4	V	LVTTL
Tx_Disable Input Voltage – High	VIH	2		Vcc	V	LVTTL
Tx_Disable Input Voltage – Low	VIL	0		0.8	V	LVTTL

Electrical Characteristics

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Input Differential Impedance		90	100	110	Ω
Receiver
Receiver Differential Output Voltage		600		1600	mV
LOS Output Voltage – High	VOH	2.4		Vcc	V	LVTTL
LOS Output Voltage – Low	VOL	0		0.4	V	LVTTL
Output Differential Impedance		90	100	110	Ω

Optical Transmitter Characteristics

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Average Output Power	POUT	-8		-3	dBm
Center Wavelength	λc	1260	1310	1360	nm
Spectral Width	Δλ			3.5	nm
Extinction Ratio	ER	9			dB
Transmitter OFF Power	POFF			-45	dBm
Jitter P-P	TJ			0.1	UI
Output Eye Diagram	Complies with IEEE 802.3z

Optical Receiver Characteristics

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Center Wavelength	λc	1260		1610	nm
Receiver Sensitivity	PSEN			-32	dBm	1
Input Saturation Power (Overload)	PSAT	-3			dBm
LOS De-assert Level	LOSD			-33	dBm
LOS Assert Level	LOSA	-39			dBm
LOS hysteresis	HYS	0.5		6	dB

Note 1. Measured with PRBS27-1 pattern, @1.25Gbps, ER=9dB, BER=1×10-12 .

Package Outline
Dimensions are in millimeters. All dimensions are ±0.1mm unless otherwise specified. (Unit: mm)

Ordering Information

Part Number	Specifications
	Package	Data Rate (Mbps)	Wavelength(nm)	Temperature(°C)	Reach(km)	DDM
FTCS-M1303-02D	SFP	155	1310	-5~70	2km	Y
FTCS-M1303-02DI	SFP	155	1310	-40~85	2km	Y

北亿纤通 | F-tone Networks

企业邮箱： sales@f-tone.com
企业手机：19081343401
企业电话：028-85255257
企业传真：028-85977702

注：本产品有全国产化型号可选
本产品为FT-WL系列SFP光模块，仅展示部分参数，如有需要，请联系我们。

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.r protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.