北亿纤通荣誉产品
CFP4,CFP4 module,CFP4 optical module

产品分类:100G CFP CXP

F-TONE Technology版权所有
  • 模块封装:
  • 模块波长:
  • 更新时间:2012-10-12 15:47
  • 官方网址:http://www.f-tone.com
  • 数据手册:请联系我们sales获得
  • 购买须知

    ☉推荐兼容品牌:                                
    H3C 华三 ZTE 中兴 Huawei  CSICO 思科 ZYXEL 合勤 HP 惠普 zyxel合勤 Linksys
    DCN extrem  RedBack  Juniper  3COM Ruijie  Netgear ALPHQ
    Bdcom  D-link  Avaya alcatel   AlliedTelesis  Intel  Nortel SMC
    Dell Emulex Enterasys Feixun Force10 Brocade Adtran IPTIME
    Hirschmann IBM Asante Motorola Linksys Marconi Foundry Maipu
    McAfee Blade Nortel Planet Q-logic SMC IP-COM Asante
    SUN Telco TRENDnet Vixel Broadcom Marvell TENDA TP-link
    磊科 HILLSTONE XIRCOM 水星网络 欣全 VIGOR 港湾 AMD
    侠诺 艾泰 飞鱼星 博威 五舟 摩羯 Marvell Samsung
    宝德 飞迈瑞克 JCG Altera 世纪飞扬 浪潮 清华同方 华硕/联想
    注:购买时请说明你想用那个厂家的设备,谢谢!

    ☉如果需要详细的数据手册,请联系我们的SALES,谢谢!
    ☉如果应用中遇到什么问题,请联系我们的FAE,我们将为你提供更多 、更好的资源!
     

    CONTENT

    The next-generation CFP modules - the CFP2 and CFP4 - promise to double and double again the number of 100 Gigabit-per-second (Gbps) optical module interfaces on a blade.

    Using the CFP4, up to 16, 100Gbps modules will fit on a blade, a total line rate of 1.6 Terabits-per-second (Tbps). With a goal of a 60W total module power budget per blade, that equates to 27Gbps/W. In comparison, the power-efficient SFP+ achieves 10Gbps/W.
     

    Source: Gazettabyte, Xilinx

    The CFP2 is about half the size of the CFP while the CFP4 is half the size of the CFP2. The CFP4 is slightly wider and longer than the QSFP.

    The two CFP modules will use a 4x25Gbps electrical interface, doing away with the need for a 10x10Gbps to 4x25Gbps gearbox IC used for current CFP 100GBASE-LR4 and -ER4 interfaces. The CFP2 and CFP4 are also defined for 40 Gigabit Ethernet use.

    The CFP's maximum power rating is 32W, the CFP2 12W and the CFP4 5W. But vendors that put eight CFP2 or 16 CFP4s on a blade still want to meet the 60W total power budget.

     

    Getting close: Four CFP modules deliver slightly less bandwidth than 48 SFP+ modules: 4x100Gbps versus 480Gbps. The four also consume more power - 60w versus 48W. Moving to the CFP2 module will double the blade's bandwidth without consuming more power while the CFP4 will do the same again. a blade with 16 CFP4 modules promises 1.6Tbps while requiring 60W. Source: Xilinx

    The first CFP2 modules are expected this year - there could be vendor announcements as early as the upcoming OFC/NFOEC 2012 show to be held in LA in the first week in March. The first CFP4 products are expected in 2013.

    上一篇:CFP,CFP2,CFP4,CFP光模块制造商 F-tone成产专项小组专攻CFP4.   下一篇:CFP2 SR10,850nm,100GBASE-SR10光模块

    产品展示