兼容安华高AFBR-5803ATZ

Product Features
● Uncooled laser diode with MQW structure
● Reach 2 km Transmission Distance
● Duplex Single Mode Transceiver 1×9 Footprint
● SC, FC or ST Optical Interface are Optional
● Single +3.3V Power Supply
● PECL/LVPECL Differential Inputs and Outputs
● PECL/LVPECL Signal Detection Output alternative
● Fast Ethernet and ITU G.957 Compliant
● Compliant RoHS and lead free
● Complies with Telcordia GR-468-CORE
● Operating case temperature:
         Standard : 0 to +70℃
        Extend : -20 to +85℃
        Industrial : -40 to +85℃

Product Applications
● ATM
● SONET/SDH
● Fast Ethernet
● Switches
● Routers
● Hubs

Performance Specifications
Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Storage TemperatureTst-40+85
Operating Temperature TOFTBR-5803Z/FTBR-5803TZ0+70
FTBR-5803AZ/FTBR-5803ATZ-20+85
FTBR-5803AQZ/FTBR-5803ATQZ-40+85
Input VoltageGNDVCCV
Power Supply VoltageVCC-VEE0+6V

 Recommended Operating Conditions

ParameterSymbolMinTypMaxUnit
Storage TemperatureTst-40+85
Operating Case TemperatureTCFTBR-5803Z/FTBR-5803TZ0+70
FTBR-5803AZ/FTBR-5803ATZ-20+85
FTBR-5803AQZ/FTBR-5803ATQZ-40+85
Power Supply VoltageVCC3.33.13.33.5V
Data RateDR155200Mbps

 Optical Specification

Transmitter
ParameterSymbolMinTypMaxUnitNote
Center Wavelength1310 FPlC126113101360nmFTBR-5803xx
1550 FP150015501600FTBR-5803xx-1550nm
Spectral WidthDl4nm
Average Optical Output PowerPo-20-14dBm62.5/125UM MMF
Average Optical Output PowerPo-22.5-14dBm50/125UM MMF
Extinction RatioExt10dB
Optical Rise Time(20%-80%)Tr3ns
Optical Fall Time(20%-80%)Tf3ns
Output Eye DiagramCompliant with ITU-T.G957
Receiver
ParameterSymbolMinTypMaxUnitNote
Operate Wavelength12611620nm
SensitivityPr-32dBm1
SaturationPs-3dBm1
Signal Detect Assert Level-45dBmAlarm: Low-level
Signal Detect De-assert Level-33dBm
SD Hysteresis0.55dB

Note: 1. Minimum Sensitivity and saturation levels for a 2 23 -1 PRBS test pattern @155Mbps.

 Electrical Specification

Transmitter
ParameterSymbolMinTypMaxUnitNote
Power Supply CurrentICC70120mA2
Input Differential ImpedanceZIN90100110Ω
Differential Input VoltageVIH- VIL3002000mV
Receiver
ParameterSymbolMinTypMaxUnitNote
Power Supply CurrentICC6080mA2
Data Output Voltage-LowVOL-VCC-2.0– 1.58V3
Data Output Voltage-HighVOH-VCC– 1.1-0.74V3
Signal Detect Output Voltage-LowVSDL-VCC-2.0– 1.58VPECL
Signal Detect Output Voltage-HighVSDH-VCC– 1.1-0.74V

Note: 2. The current excludes the output load current.
3. Terminated with 50Ohm to Vcc-2V.

 Pin Definitions
PIN Diagram

PIN Description

PINSymbolNote
1GNDRDirectly connect this pin to receiver signal ground plane.
2RD+See recommended circuit schematic.
3RD-See recommended circuit schematic.
4SDActive high on this indicates a receiver optical signal.
5VCCR+3.3V DC power for the receiver section.
6VCCT+3.3V DC power for the transmitter section.
7TD-See recommended circuit schematic.
8TD+See recommended circuit schematic.
9GNDTDirectly connect this pin to transmitter signal ground plane.

 Recommended Circuit 1

Recommended Circuit 2


Note: The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power supply filtering is required for good EMI performance.Use short tracks from the inductors L1/L2 to the module Rx VCC/Tx VCC. A GND plane under the module is required for good EMI and sensitivity performance

Package Diagram

Order Information

FTBR-5803Z兼容AVAGO(安华高)AFBR-5803Z,国产替换兼容AVAGO(安华高)AFBR-5803Z
FTBR-5803TZ兼容AVAGO(安华高)AFBR-5803TZ,国产替换兼容AVAGO(安华高)AFBR-5803TZ
FTBR-5803AZ兼容AVAGO(安华高)AFBR-5803AZ,国产替换兼容AVAGO(安华高)AFBR-5803AZ
FTBR-5803ATZ兼容AVAGO(安华高)AFBR-5803ATZ,国产替换兼容AVAGO(安华高)AFBR-5803ATZ
FTBR-5803AQZ兼容AVAGO(安华高)AFBR-5803AQZ,国产替换兼容AVAGO(安华高)AFBR-5803AQZ
FTBR-5803ATQZ兼容AVAGO(安华高)AFBR-5803ATQZ,国产替换兼容AVAGO(安华高)AFBR-5803ATQZ

北亿纤通 | F-tone Networks
企业邮箱:sales@f-tone.com
企业手机:19081343401
企业电话:028-85255257
企业传真:028-85977702

注:本产品有全国产化型号可选
Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representativom any F-tone Networks sales representative.tive.one Networks or others. Further details are available from any F-tone Networks sales representative.s sales representative.

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

Traffic Testing

测试误码率和丢包率,使其符合相应标准,确保收发器的性能。

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

端面测试

检查光纤收发模块的端面并保持清洁,以实现更稳定的数据传输、更好的性能和耐用性。

兼容品牌:

华为 | 华三 | 中兴 | 锐捷 | Cisco | Juniper | Arista | Brocade |HPE ProCurve | HPE Aruba | HPE BladeSystem | HPE H3C | H3C | Dell | Extreme | HW | Generic | F-tone | Intel | Netgear | IBM | NVIDIA/Mellanox (Ethernet) | Ciena | Fortinet | Avago | Avaya | Alcatel-Lucent | D-Link | F5 | Ubiquiti | Mikrotik |Broadcom…..

滚动至顶部