1250M 单模1550nm 20km SFP BIDI光模块

Product Features
● Uncooled Laser Diodewith MQW Structure
● InGaAs PIN-TIA Photodiode Receiver
● 9/125μm SMF
● BIDI Single Mode Transceiver SFP Footprint
● LC Or SC Optical Interface Are Optional
● Compliant With SFP MSA and SFF-8472
● Digital Diagnostic Monitoring Interface
● Single +3.3V Power Supply
● CML Differential Inputsand Outputs
● LVTTL Signal Detection Output
● Compliant With ITU-TG.957
● Compliant With RoHS and LeadFree
● Metal Enclosure for Lower EMI
● Operating Case Temperature:
      Standard: 0 to +70℃
      Extend: -20 to +85℃
      Industrial: -40 to +85℃

Product Applications
● Fast Ethernet
● ATM/SONET/SDH
● Switch/Router
● Other Optical Transmission Systems

Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Storage TemperatureTst-40+85°C
Operating TemperatureTOBYCS-Bxx12-20D0+70°C
BYCS-Bxx12-20DE-20+85°C
BYCS-Bxx12-20DI-40+85°C
Input VoltageGNDVCCV
Power Supply VoltageVCC-VEE0+3.6V

 Note: Stress in excess of maximum absolute ratings can cause permanent damage to the module.

Recommended Operating Conditions

ParameterSymbolMinTypMaxUnit
Storage TemperatureTst-40+85°C
Operating Case TemperatureTCBYCS-Bxx12-20D0+70°C
BYCS-Bxx12-20DE-20+85°C
BYCS-Bxx12-20DI-40+85°C
Power Supply VoltageVCC3.13.33.5V
Power Supply CurrentICC300mA
Data RateDR155Mbps

Optical Specification

Transmitter
ParameterSymbolMinTypMaxUnitNote
Center Wavelength1310 FPC126113101360nm
1550150115501600
Spectral Width1310nmFP夕 匕4nm
1550nm DFB1
Average Optical Output PowerPo-9-3dBm20KM
Extinction RatioER9dB
Optical Rise/Fall Time(20%-80%)Tr/Tf0.27ns
Output Eye DiagramCompliant with ITU-T G.957
Receiver
ParameterSymbolMinTypMaxUnitNote
Operate Wavelength1550150115501600nm
1310126113101360nm
Receiver SensitivityRSENS-24dBm1
Receiver SaturationPRS-3dBm1
LOS Assert-40dBmAlarm: High-level
LOS De-Assert-24dBm
LOS Hysteresis0.55dBm

Electrical Specification

Transmitter
ParameterSymbolMinTypMaxUnitNote
Power Supply CurrentICCT70150mA2
Input Differential ImpedanceZIN90100110Ω
Input Swing Differential VoltageVIN5002400mV3
TX-Disable VoltageDisable2.0VCCV
Enable00.8V
TX-Fault VoltageFault2.0VCCV
Normal00.8V
Receiver
ParameterSymbolMinTypMaxUnitNote
Power Supply CurrentICCR70140mA2
Output Swing Differential VoltageVOUT6002000mV4
LOS VoltageHigh2.0VCCV
Low00.8V

Note: 
1. Minimum Sensitivity and saturation levels for a 223-1 PRBS test pattern @155Mbps.
2. The current excludes the output load current.
3. CML input, internally AC-coupled and terminated
4. Internally AC-coupled.
4. Internally AC-coupled.

Package Diagram
Board Layout Hole Pattern


LC Side Interface

SCSide Interface

Order Information

产品型号封装-B波长(-xx)速率(xx)传输距离 (-xx)x等级(x)
BYCS-B1312- 20Dxx/
BYCS-B1512- 20Dxx
SFP BIDI13=Tx1310/ Rx1550FP  
15=Tx1550/ Rx1310FP  
15=Tx1550/ Rx1310DFP
12=1.25GBP/s20=20km 
40=40km
空 不带DDM 
D 带 DDM
空 商业级 
E 扩展级 
I 工业级

北亿纤通 | F-tone Networks

企业邮箱: sales@f-tone.com
企业手机:19081343401
企业电话:028-85255257
企业传真:028-85977702

注:本产品有全国产化型号可选
本产品仅展示部分参数,如有需要,请您联系我们。

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative. available from any F-tone Networks sales representative.tone Networks or others. Further details are available from any F-tone Networks sales representative.Networks sales representative.one Networks sales representative.one Networks or others. Further details are available from any F-tone Networks sales representative.s sales representative.

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

Traffic Testing

测试误码率和丢包率,使其符合相应标准,确保收发器的性能。

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

端面测试

检查光纤收发模块的端面并保持清洁,以实现更稳定的数据传输、更好的性能和耐用性。

兼容品牌:

华为 | 华三 | 中兴 | 锐捷 | Cisco | Juniper | Arista | Brocade |HPE ProCurve | HPE Aruba | HPE BladeSystem | HPE H3C | H3C | Dell | Extreme | HW | Generic | F-tone | Intel | Netgear | IBM | NVIDIA/Mellanox (Ethernet) | Ciena | Fortinet | Avago | Avaya | Alcatel-Lucent | D-Link | F5 | Ubiquiti | Mikrotik |Broadcom…..

滚动至顶部