SFP Transceiver,SM1310nm,1.25G,20k

Product Description
F-tone Networks’s FTCS-1312-20Dxx-GC Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector.The module data link up to 10KM in 9/125um single mode fiber.
The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.

Product Features
● Up to 1.25Gb/s data links
● 1310nm FP laser transmitter and PIN photo-detector
● Up to 20km on 9/125µm SMF
● Hot-pluggable SFP footprint
● Duplex LC/UPC type pluggable optical interface
● Low power dissipation
● Metal enclosure, for lower EMI
● RoHS compliant and lead-free
● Single +3.3V power supply
● Support Digital Diagnostic Monitoring interface
● Compliant with SFF-8472
● Meet ESD requirements, resist 8KV direct contact voltage
● Case operating temperature
● Commercial: 0°C to +70°C
      Extended: -10°C to +80°C
      Industrial: -40°C to +85°C

Applications
● Switch to Switch Interface
● Gigabit Ethernet
● 1xFiber channel Application
● Switched Backplane Applications
● Router/Server Interface
● Other Optical Links

Absolute Maximum Ratings 

ParameterSymbolMin.Typ.Max.UnitNote
Storage TemperatureTs-4085ºC
Relative HumidityRH595%
Power Supply VoltageVCC-0.54V
Signal Input Voltage-0.3Vcc+0.3V
Receiver Damage Threshold+5dBm

Recommended Operating Conditions

ParameterSymbolMin.Typ.Max.UnitNote
Case Operating TemperatureTcase070ºCFTCS-1312-20D-GC
-1080FTCS-1312-20DE-GC
-4085FTCS-1312-20DI-GC
Power Supply VoltageVCC3.133.33.47V
Power Supply CurrentICC250mA
Power Supply Noise Rejection100mVp-p100Hz to 1MHz
Data Rate1250/1250MbpsTX Rate/RX Rate
Transmission Distance20KM
Coupled FiberSingle mode fiber9/125um SMF

Specification of Transmitter

ParameterSymbolMin.Typ.Max.UnitNote
Average Output PowerPOUT-9-3dBmNote (1)
Extinction RatioER9dB
Center WavelengthλC127013101360nm
Side Mode Suppression RatioSMSRdB
Spectrum Bandwidth (RMS)σ3.5nm
Transmitter OFF Output PowerPOff-45dBm
Output Eye MaskCompliant with IEEE802.3 z (class 1 laser safety)Note (2)

Notes:
1.Measure at 2^7-1 NRZ PRBS pattern
2.Transmitter eye mask definition

Specification of Receiver

ParameterSymbolMin.Typ.Max.UnitNote
Input Optical WavelengthλIN12701610nmPIN-TIA
Receiver SensitivityPIN-20dBmNote (1)
Input Saturation Power (Overload)PSAT-3dBm
Los Of Signal AssertPA-36dBm
Los Of Signal De-assertPD-21dBmNote (2)
LOS HysteresisPA-PD0.526dB

Notes:
1.Measured with Light source 1310nm, ER=9dB; BER =<10^-12 @PRBS=2^7-1 NRZ
2.When LOS de-asserted, the RX data+/- output is High-level (fixed)

Electrical Interface Characteristics

ParameterSymbolMin.Typ.Max.UnitNote
Power ConsumptionP  0.85W 
Supply CurrentIcc  250mA 
Transmitter
Single-ended Input Voltage ToleranceVCC-0.34.0V
Differential Input Voltage SwingVin,pp2002400mVpp
Differential Input ImpedanceZin90100110Ohm
Transmit Disable Assert Time5us
Transmit Disable VoltageVdisVcc-1.3VccV
Transmit Enable VoltageVenVee-0.30.8V
Receiver
Differential Output Voltage SwingVout,pp500900mVpp
Differential Output ImpedanceZout90100110Ohm
Data output rise/fall timeTr/Tf100ps20% to 80%
LOS Assert VoltageVlosHVcc-1.3VccV
LOS De-assert VoltageVlosLVee-0.30.8V

Mechanical Specifications (Unit: mm)

Part Number Ordering information

Product part NumberData Rate(Mbps)MediaWavelength(nm)Transmission Distance(km)Temperature Range(Tcase)(
FTCS-1312-20D-GC1250Single mode fiber1310200~70commercial
FTCS-1312-20DE-GC1250Single mode fiber131020-10~80extended
FTCS-1312-20DI-GC1250Single mode fiber131020-40~85industrial

注:“GC”为全国产。

北亿纤通 | F-tone Networks

企业邮箱: sales@f-tone.com
企业手机:19081343401
企业电话:028-85255257
企业传真:028-85977702

注:本产品有全国产化型号可选
本产品SFP光模块,仅展示部分参数,如有需要,请联系我们。

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

Traffic Testing

测试误码率和丢包率,使其符合相应标准,确保收发器的性能。

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

端面测试

检查光纤收发模块的端面并保持清洁,以实现更稳定的数据传输、更好的性能和耐用性。

兼容品牌:

华为 | 华三 | 中兴 | 锐捷 | Cisco | Juniper | Arista | Brocade |HPE ProCurve | HPE Aruba | HPE BladeSystem | HPE H3C | H3C | Dell | Extreme | HW | Generic | F-tone | Intel | Netgear | IBM | NVIDIA/Mellanox (Ethernet) | Ciena | Fortinet | Avago | Avaya | Alcatel-Lucent | D-Link | F5 | Ubiquiti | Mikrotik |Broadcom…..

滚动至顶部