
Features
● Low-level off state leakage current of max.1 μA
● Low driver power requirements (TTL/CMOS Compatible)
● High reliability
● No moving parts
● 1500Vms Input/Output isolation
● Arc-Free with no snubbing circuits
● SOPpackage 4 Pin type in miniature design(4.4×4.3×2.1mm/.173×.169×.083inch)
● The optically coupled input is controlled by a highly efficientGaAIAs infrared LED and MOS FETs on the output side.
Applications
● Telecommunications (PC, Electronic notepad)Measuring and Testing equipment-Industrial control
● Security equipments-High speed inspection machine
Absolute Maximum Ratings (Ambient Temperature:25℃)
| Item | symbol | value | units | Note | |
| Input | Continuous LED Current | IF | 50 | mA | |
| Peak LED Current | IFP | 1000 | mA | f= 100Hz , duty- 1% | |
| LED Reverse Voltage | VR | 5 | V | ||
| Input Power Dissipation | PIN | 75 | mW | ||
| Output | Load Voltage | VL | 60 | V(AC Peak or DC) | |
| Load Current | IL | 500 | mA | ||
| Peak Load Current | Ipeak | 1.5 | A | 100ms(1 pulse) | |
| Output Power Dissipation | Pout | 450 | mW | ||
| Total power Dissipation | PT | 500 | mW | ||
| I/o Breakdown voltage | VI/O | 1 500 | Vrms | RH=60% , 1 min | |
| Operating Temperature | Topr | -40 to +85 | ℃ | ||
| Storage Temperature | Tstg | -40 to +100 | ℃ | ||
| Pin soldering Temperature | Tsol | 260 | ℃ | 10 sec max. | |
Electrical Specifications (Ambient Temperature:25℃)
| Item | symbol | MIN . | TYP. | MAX. | units | conditions | |
| Input | LED Forward voltage | VF | 1.2 | 1.4 | V | IF= 10mA | |
| Operation LED Current | IFon | 0.8 | 2.0 | mA | |||
| Recovery LED Current | IFoff | 0.35 | 0.5 | mA | |||
| Recovery LED Voltage | VFoff | 0.7 | V | ||||
| Output | On-Resistance | Ron | 0.8 | 1.6 | Ω | IF=5mA,lL=100mA,Time to flow is within 1 sec. | |
| Off-State Leakage Current | ILeak | 1.0 | μA | VL= Rating | |||
| Output Capacitance | Cout | 28 | pF | V =0, f= 1MHz | |||
| Transmission | Turn-On Time | Ton | 0.35 | 0.5 | ms | IF=5mA, l=100mA, | |
| Turn-Off Time | Toff | 0.1 | 0.3 | ms | |||
| Coupled | I/O Isolation Resistance | RI/O | 1010 | Ω | DC500V | ||
| I/O Capacitance | CI/O | 0.8 | 1.5 | pF | f= 1 MHz | ||
Reference Data

Dimensions

OutlineDimensions

订购信息
| category | output rating | part No. | packing quantity | |
| Load voltage | Load current | SOP-4 | Tape and reel | |
| AC/DC | 60 V | 0.5A | FTY282S | 1-reel: 1 , 000 Pcs. |
北亿纤通 | F-tone Networks
企业邮箱:sales@f-tone.com
企业手机:19081343401
企业电话:028-85255257
企业传真:028-85977702
注:本产品有全国产化型号可选
本产品为FT-AN系列,仅展示部分参数,如有需要,请您联系我们。
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.

光学性能测试
测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。
Traffic Testing
测试误码率和丢包率,使其符合相应标准,确保收发器的性能。


光学性能测试
测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。
端面测试
检查光纤收发模块的端面并保持清洁,以实现更稳定的数据传输、更好的性能和耐用性。


兼容品牌:
华为 | 华三 | 中兴 | 锐捷 | Cisco | Juniper | Arista | Brocade |HPE ProCurve | HPE Aruba | HPE BladeSystem | HPE H3C | H3C | Dell | Extreme | HW | Generic | F-tone | Intel | Netgear | IBM | NVIDIA/Mellanox (Ethernet) | Ciena | Fortinet | Avago | Avaya | Alcatel-Lucent | D-Link | F5 | Ubiquiti | Mikrotik |Broadcom…..
