25G 1310nm 10km SFP28 光模块工业级

Description
The F-tone Networks FTCS-1325G-10DI is a single-Channel, Pluggable, Fiber-Optic SFP28 for 25 Gigabit Ethernet and Infiniband EDR Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 25.78125 Gbps up to 10km. This module is designed to operate over single mode fiber systems using a nominal wavelength of 1310nm. The electrical interface uses a 20 contact edge type connector. The optical interface uses duplex LC receptacle. This module incorporates F-tone Networks proven circuit and technology to provide reliable long life, high performance, and consistent service.

Features
● Hot-pluggable SFP28 form factor
● Supports 25Gbps data rate
● Maximum link length of 10km
● 1310nm DFB laser and PIN photo-detector
● Internal CDR on both Transmitter and Receiver channel
● Duplex LC receptacle
● Single 3.3V power supply
● Power dissipation < 1.5W
● Digital diagnostics functions are available via the I2C interface
● RoHS-6 compliant
● Commercial case temperature range: -40°C to 85°C

Applications
● 25GBASE-LR Ethernet

Absolute Maximum Ratings
Table 1 – Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Supply VoltageVcc03.6V
Storage TemperatureTs-40+85°C
Operating Humidity585%

Recommended Operating Conditions
Table 2 – Recommended Operating Conditions

ParameterSymbolMinTypicalMaxUnit
Operating Case TemperatureIndustryTc-40+85°C
Power Supply VoltageVcc3.133.33.47V
Power Supply CurrentIcc450mA

Optical and Electrical Characteristics
Table 3 – Optical and Electrical Characteristics

ParameterSymbolMinTypicalMaxUnitNotes
Transmitter
Data rateBR25.78Gbps
Centre Wavelengthλc129513101325nm
Spectral Width (-20dB)σ1nm
Side Mode Suppression RatioSMSR30dB
Average Output PowerPavg-1.52dBm
Extinction RatioER3.5dB
Differential data input swingVIN,PP180700mV
Input Differential ImpedanceZIN90100110Ω
TX DisableDisable2.0VccV
Enable00.8V
TX FaultFault2.0VccV
Normal00.8V
Receiver
Data rateBR25.78Gbps
Centre Wavelengthλc129513101325nm
Average Receive PowerPavg-13.32dBm
Unstressed Receiver Sensitivity (OMA)Psens-13.0dBm1
LOS De-AssertLOSD-12dBm
LOS AssertLOSA-13dBm
LOS Hysteresis0.5dB
Differential data output swingVout,PP300900mV
LOSHigh2.0VccV
Low0.8V

Notes1: For 25G-LR with FEC, receiver sensitivity is defined at 5E-5 BER level, not 10-12 BER level.

Mechanical Dimensions

Ordering information

Part NumberProduct Description
FTCS-1325G-10DI25Gbps, 1310nm; SFP28, 10km, DDM   -40ºC ~ +85ºC

北亿纤通 | F-tone Networks

企业邮箱:sales@f-tone.com
企业手机:19081343401
企业电话:028-85255257
企业传真:028-85977702

注:本产品有全国产化型号可选

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative. from any F-tone Networks sales representative.s or others. Further details are available from any F-tone Networks sales representative.y F-tone Networks sales representative.

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

Traffic Testing

测试误码率和丢包率,使其符合相应标准,确保收发器的性能。

光学性能测试

测试光纤收发模块的眼图情况、接收灵敏度、消光比、波长、发光、光接收、电流和电压,以确保信号质量、传输的稳定性和可靠性。

端面测试

检查光纤收发模块的端面并保持清洁,以实现更稳定的数据传输、更好的性能和耐用性。

兼容品牌:

华为 | 华三 | 中兴 | 锐捷 | Cisco | Juniper | Arista | Brocade |HPE ProCurve | HPE Aruba | HPE BladeSystem | HPE H3C | H3C | Dell | Extreme | HW | Generic | F-tone | Intel | Netgear | IBM | NVIDIA/Mellanox (Ethernet) | Ciena | Fortinet | Avago | Avaya | Alcatel-Lucent | D-Link | F5 | Ubiquiti | Mikrotik |Broadcom…..

滚动至顶部